Page 1 of 1
Tobrin tool
Posted: Sat Dec 23, 2023 7:51 pm
by Shelbycsx
Has anyone seen one before. I'm looking for a pair of these.
Re: Tobrin tool
Posted: Sun Dec 24, 2023 9:28 pm
by Bryant
What is it? Looks like you would screw it in the spark plug hole to lift the engine?
Bryant
Re: Tobrin tool
Posted: Mon Dec 25, 2023 9:59 am
by Mark Gregush
Looks to have 7/8 straight thread so would not work for Model T if that was your plan.
Re: Tobrin tool
Posted: Mon Dec 25, 2023 7:45 pm
by rickd
I don't know if this is a match; Ford Service Bulletins, hardback copy, page 162. Use two of these to remove a cylinder head from a hot motor. Your tool looks a little fancier than the one in the Bulletin. Hope you find them.
Re: Tobrin tool
Posted: Mon Dec 25, 2023 9:11 pm
by Art M
I use two 1/2 in pipe nipples screwed into number 1 and 3 spark plug holes to handle a model t head.. Easy and affordable.
Art Mirtes
Re: Tobrin tool
Posted: Tue Dec 26, 2023 11:07 am
by RajoRacer
These are the "Stevens" equivalent to the above tool shown but in 1/2" p. for T's.