Weaver tow truck crane

Dropacent · Post by **Dropacent** » Thu Jun 06, 2019 12:19 pm

If you have a weaver model t era tow truck crane, I could use a couple of dimensions to help me fix mine up. Tmorsher@icloud.com if you are able to help. Thanks!

Post by **George House** » Thu Jun 06, 2019 2:17 pm

Tim,
Is yours a 2 Ton or 3 Ton Crane? The former was fitted on Model T s and the latter on TT s...

Dropacent · Post by **Dropacent** » Thu Jun 06, 2019 5:54 pm

This is the one I have, George

26modeltt · Post by **26modeltt** » Thu Jun 06, 2019 10:00 pm

Tim,

I have a Weaver Model G 3 ton capacity wrecker boom mounted on my '26 TT --- what dimensions are you looking for?

Jack

Dropacent · Post by **Dropacent** » Fri Jun 07, 2019 12:39 pm

I have Donnie Browns old crane. I could use 1) a couple of photos of this area. 2) dimension of angle iron and aprx length along the edge 3) length of this round rod. 4) a couple of photos and overall length of crank handle so I can carve up a foundry pattern. Post here or email tmorsher@icloud.com mucho gracias!

Post by **George House** » Fri Jun 07, 2019 1:13 pm

Tim,
You have a 2 ton crane. Should say so on the cast iron data plate. Yours has 2 axles of mechanical advantage and Jack’s 3 Ton is larger and sports 3 axles. Makes a difference in measurements.

Dropacent · Post by **Dropacent** » Thu Jun 20, 2019 10:44 pm

Dropacent · Post by **Dropacent** » Thu Jun 20, 2019 10:46 pm

Joe Bell · Post by **Joe Bell** » Fri Jun 21, 2019 6:48 am

Is the crank handle 1 in square? is so I know where one is.

MTFCA Forum

Weaver tow truck crane

Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane

Re: Weaver tow truck crane