Early 1909 block.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Erik Barrett
Topic author - Posts: 531
- Joined: Mon Jan 07, 2019 12:32 am
- First Name: Erik
- Last Name: Barrett
- * REQUIRED* Type and Year of Model Ts owned: 1913 speedster 1924 touring 1925 dump truck
- Location: Auburn, Ca.
Early 1909 block.
Today I line bored out an early open valve T block that had run the crankshaft formerly directly in the block, to accept babbitt. This was easier to do than to post pics on this site so if you want to see more send me a message and we can talk and share pics. I have another one in the queue. I would love to share what we do here with anyone interested and anyone can come here and pour their own bearings. I have many pictures of what we do here at Rumbleseat Garage that people would like to see but I don’t know how to establish a page that people would want to see.
-
JTT3
- Posts: 1855
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
Re: Early 1909 block.
Message sent
-
Erik Barrett
Topic author - Posts: 531
- Joined: Mon Jan 07, 2019 12:32 am
- First Name: Erik
- Last Name: Barrett
- * REQUIRED* Type and Year of Model Ts owned: 1913 speedster 1924 touring 1925 dump truck
- Location: Auburn, Ca.