Page 1 of 1

KW Wood Coilbox

Posted: Fri Mar 14, 2025 1:09 pm
by Original Smith
The KW wood coilbox used only in 1913 uses non insulated silver colored stranded wire about 14 AWG. I'm wondering if this type of wire is still available?

Re: KW Wood Coilbox

Posted: Fri Mar 14, 2025 1:52 pm
by Jerry VanOoteghem
Original Smith wrote:
Fri Mar 14, 2025 1:09 pm
The KW wood coilbox used only in 1913 uses non insulated silver colored stranded wire about 14 AWG. I'm wondering if this type of wire is still available?
Larry,

It's "buss wire". Tin coated copper wire.

https://www.mcmaster.com/products/bus-wire/

https://sea-wire.com/aa59551/

OOPS... missed the part about it being stranded wire.

Re: KW Wood Coilbox

Posted: Fri Mar 14, 2025 2:01 pm
by TRDxB2
Couldn't find it bare. 14 AWG bare stranded hookup wire

You may need to strip the wire 14 AWG marine grade hookup wire
This listed the best match & at Home Depot too
https://www.homedepot.com/p/Ancor-Marin ... /316303205

Looks like purple is on-sale other colors are higher
wireb.png

Re: KW Wood Coilbox

Posted: Sun Mar 16, 2025 12:22 pm
by Original Smith
Interesting. That is what I did, however, I was unaware of marine grade stranded wire. Thanks for the information !

Re: KW Wood Coilbox

Posted: Wed Mar 26, 2025 4:12 pm
by Original Smith
I had to go to a marine supply store to find it. It is not twisted but is the correct wire I was looking for. All that needs to be done is the insulation stripped off, and then twisted. #14 AWG.

Re: KW Wood Coilbox

Posted: Wed Mar 26, 2025 6:05 pm
by Allan
You might ned to check the number of strands before twisting it. ;)

Allan from down under.