Page 1 of 1

Still need some help with length of drag link & tie rod on an early 1910 front axle

Posted: Sun Jun 29, 2025 10:21 am
by JTT3
I called myself looking up these measurements but can’t find anything with the exception of a letter of change in 1912. Your help would be greatly appreciated. Best John

Re: Need some help with length of drag link & tie rod on an early 1910 front axle

Posted: Sun Jun 29, 2025 10:47 am
by frontyboy
I have a brand new adjustable tie rod bought from Lang's for a speedster project that was never used. These are a high quality product and a direct copy of the original.

Not sure if they are available any more. I think they were nearly $200. I would sell this one for $100 plus the freight if that interested.

frontyboy. 2ho6-919*1949

Re: Still need some help with length of drag link & tie rod on an early 1910 front axle

Posted: Mon Jun 30, 2025 7:31 pm
by JTT3
Hey you guys with 1910’s or those that know could you please help me with the length of the tie rod & the length of the drag link. I’m trying to help a friend out that is restoring a 1910 and he needs to confirm the measurements of what he has and what is correct. Thanks in advance, John.

Re: Still need some help with length of drag link & tie rod on an early 1910 front axle

Posted: Tue Jul 01, 2025 3:21 am
by Allan
If you need one, you should jump on Frontyboy's offer. The reproductions were of excellent quality, but I believe they are no longer available. 1910 uses the fine thread one.
I bought just the threaded end for my 1912 van from the gent making the repops when I met him at Chickasha in 2010.
Allan from down under.

Re: Still need some help with length of drag link & tie rod on an early 1910 front axle

Posted: Tue Jul 01, 2025 8:48 pm
by JTT3
Howard sent you an email. Best John