Changing Tires

[TXGOAT2]

Is removing and replacing 4.40/4.50 X 21 tires on Ford wire wheels easiest to do according to the Ford owner's manual? I have Olympic-style 4 ply polyester tires that need replaced. They are about as stiff as brand new Firestone tires. I can't get them to drop into the rim gutter enough to get any kind of tire tool under both beads.

[Karl Von Neumann]

Take one bead off then pull the tube then take the other that's how they are supposed to come off not both bead at once. I change tires and remove tires all the time easy job

[TXGOAT2]

That's contrary to the owner's manual, but that's the way I've always dealt with tube type tires, so I'll take your advice. I suspect that tires made today are a little different from the 1920's balloon tires. The manual emphasizes centering the casing and tube on the wheel once they're in place. The tires made today seem to center themselves when inflated, provided the rim is slick.

[Allan]

I have 21" tyres on wire wheels fitted by my local tyre shop. Their machine takes up to 22' wheels. He puts a small tab of insulation tape on the "grabbers" to protect the paint on the rim. The rotating arm is set to run around the topsde of the rim about 1/8" above the rim, so again, no paint damage. Easy off and easy on. The $5 charge per tyre may reflect our patronage with all our farm tyre work.

Allan from down under.

[TXGOAT2]

That's a great price. I don't think I'd get such treatment here. In times past, yes. Today, not likely.