Page 1 of 1
Exhaust cut out
Posted: Mon Feb 23, 2026 10:03 pm
by BillM
Can anyone identify this cutout?
Re: Exhaust cut out
Posted: Tue Feb 24, 2026 1:23 am
by Allan
It is similar in concept to the Lucas one offered recenrly in the classifieds. It looks like it could be fitted without cutting the pipe in two, preserving the integrity of same.
Alan from down under.
Re: Exhaust cut out
Posted: Tue Feb 24, 2026 12:42 pm
by BillM
It is similar to it. I'm going to bead blast it soon. Maybe there's a brand name or model number somewhere on it.
Re: Exhaust cut out
Posted: Tue Feb 24, 2026 6:56 pm
by TRDxB2
Got one like it... It has a two plates to control exhaust deflection. I'll take a look for a name too
Re: Exhaust cut out
Posted: Wed Feb 25, 2026 7:04 pm
by Allan
You might be cautious when handling the packing/gasket material. It looks very much like woven asbestos to me. When I fitted my whistle to my chocolate van I used sheet exhaust gasket material.
Allan from down under.
Re: Exhaust cut out
Posted: Thu Feb 26, 2026 3:59 pm
by Craig Leach
If you fear asbestos make sure it is wet so
There is no dust.
Craig.