Page 1 of 1
Model T Ford Ignition Coil Rebuilding
Posted: Fri Feb 27, 2026 4:47 pm
by Ron Patterson
I have received several telephone calls indicating coil rebulders have no coil points in stock.
I do have coil points in stock and can rebuild your coils.
Ron Patterson
Re: Model T Ford Ignition Coil Rebuilding
Posted: Fri Feb 27, 2026 9:40 pm
by MKossor
Can folks get their quality rebuilt coils expertly tuned for equal and consistent firing time using the ECCT?
Re: Model T Ford Ignition Coil Rebuilding
Posted: Fri Feb 27, 2026 9:53 pm
by Scott_Conger
Can folks get their quality rebuilt coils expertly tuned for equal and consistent firing time using the ECCT?
I-Timer + ECCT Adjusted Coils = Best Model T Engine Performance Possible!
www.modeltitimer.com www.modeltecct.com
Why not just advertise your product in your own ad rather than Troll a guy who has been doing his thing and faithfully supporting the hobby for decades?
Ron doesn't deserve this kind of baiting.
Re: Model T Ford Ignition Coil Rebuilding
Posted: Fri Feb 27, 2026 10:10 pm
by MKossor
Why not just advertise your product in your own ad rather than Troll a guy who has been faithfully supporting the hobby for decades?
Because Scott, advertising is prohibited on the discussion forum. At least, that is what I have been dogged relentlessly of doing for the last 10 years whenever mention of the ECCT, its theory of operation, usage tips or discussion thereof has taken place here on the discussion forum so I figured it must be OK to mention it here on an
"approved" advertisement thread.
Its high time Ron abide by the same forum rules he worked tirelessly imposing on others who faithfully supported the hobby for over a decade.
Re: Model T Ford Ignition Coil Rebuilding
Posted: Sat Feb 28, 2026 10:32 am
by Drobnock
Well Scott, I agree with Mike and Ron.
And Scott - what is this - "NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
Re: Model T Ford Ignition Coil Rebuilding
Posted: Mon Mar 02, 2026 3:00 am
by dykker5502
Guys - to much war already going om right now. Not here in the Forum, please!
(And now when we are at it, I for one have plenty of points too and will happy support the european branch of the hobby (mostly restricted due to shipping costs)
Re: Model T Ford Ignition Coil Rebuilding
Posted: Mon Mar 02, 2026 6:30 am
by Jerry VanOoteghem
Drobnock wrote: ↑Sat Feb 28, 2026 10:32 am
And Scott - what is this - "NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
No different than Kossor's by-line.
Re: Model T Ford Ignition Coil Rebuilding
Posted: Mon Mar 02, 2026 10:45 am
by Drobnock
Jerry VanOoteghem wrote: ↑Mon Mar 02, 2026 6:30 am
Drobnock wrote: ↑Sat Feb 28, 2026 10:32 am
And Scott - what is this - "NH Full Flow Float Valves™
Obsolete carburetor parts manufactured
No different then Kossor's by-line.
So true.
Did you know that the NH Carb was a redesign of the Holley Model G to take advantage of the newer heaver gasoline of the 1920s?