Block and head test plate and gasket

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Les Schubert
Posts: 501
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
Location: Calgary

Block and head test plate and gasket

Post by Les Schubert » Tue Jul 23, 2019 3:33 pm

I am putting together a order to make a run of;
1. 1/2” thick aluminum test plates that facilitate leak testing the T block and heads prior to assembly (or prior to doing ANY work). They will run about $150.00
2. Neoprene reuseable head gasgets for the same testing process. About $50.00


modeltbarn
Posts: 139
Joined: Sun Jan 06, 2019 6:59 pm
First Name: Gary
Last Name: London
Location: Camarillo

Re: Block and head test plate and gasket

Post by modeltbarn » Tue Jul 23, 2019 4:06 pm

I'm in!


Chad_Marcheese
Posts: 122
Joined: Tue Jan 15, 2019 6:06 am
First Name: Chad
Last Name: Marcheese
Location: Upstate, NY
Board Member Since: 2005

Re: Block and head test plate and gasket

Post by Chad_Marcheese » Tue Jul 23, 2019 4:26 pm

I have an interest in it. I can't fully commit yet, but let me know as you get closer to needing a finalized list or payment.


Topic author
Les Schubert
Posts: 501
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
Location: Calgary

Re: Block and head test plate and gasket

Post by Les Schubert » Tue Jul 23, 2019 4:29 pm

Chad
Well I hope to finalize this week!!


Erik Barrett
Posts: 194
Joined: Mon Jan 07, 2019 12:32 am
First Name: Erik
Last Name: Barrett
Location: Auburn, Ca.

Re: Block and head test plate and gasket

Post by Erik Barrett » Tue Jul 23, 2019 4:46 pm

Put me down for one.


pre15dale
Posts: 69
Joined: Sun Jan 06, 2019 7:28 pm
First Name: Dale
Last Name: Kemmerer
Location: Medford, OR1909

Re: Block and head test plate and gasket

Post by pre15dale » Thu Jul 25, 2019 12:10 pm

Las, Put me down for one also. Dale


Topic author
Les Schubert
Posts: 501
Joined: Thu Jan 10, 2019 5:47 pm
First Name: Les
Last Name: Schubert
Location: Calgary

Re: Block and head test plate and gasket

Post by Les Schubert » Thu Jul 25, 2019 12:22 pm

Dale
I have added one plate and two gaskets for you
Others, this project is now finished and closed off!!

Post Reply Previous topicNext topic