I am putting together a order to make a run of;
1. 1/2” thick aluminum test plates that facilitate leak testing the T block and heads prior to assembly (or prior to doing ANY work). They will run about $150.00
2. Neoprene reuseable head gasgets for the same testing process. About $50.00
Block and head test plate and gasket
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Les Schubert
Topic author - Posts: 1319
- Joined: Thu Jan 10, 2019 5:47 pm
- First Name: Les
- Last Name: Schubert
- * REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
- Location: Calgary
-
modeltbarn
- Posts: 338
- Joined: Sun Jan 06, 2019 6:59 pm
- First Name: Gary
- Last Name: London
- * REQUIRED* Type and Year of Model Ts owned: 1911 Touring
- Location: Camarillo
- MTFCA Number: 16592
-
Chad_Marcheese
- Posts: 253
- Joined: Tue Jan 15, 2019 6:06 am
- First Name: Chad
- Last Name: Marcheese
- * REQUIRED* Type and Year of Model Ts owned: 1925 Cut Off Touring / Pickup, 1923 Doodlebug / 1924 Speedster Gow Job
- Location: Upstate, NY
- MTFCA Number: 26904
- Board Member Since: 2005
Re: Block and head test plate and gasket
I have an interest in it. I can't fully commit yet, but let me know as you get closer to needing a finalized list or payment.
-
Les Schubert
Topic author - Posts: 1319
- Joined: Thu Jan 10, 2019 5:47 pm
- First Name: Les
- Last Name: Schubert
- * REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
- Location: Calgary
Re: Block and head test plate and gasket
Chad
Well I hope to finalize this week!!
Well I hope to finalize this week!!
-
Erik Barrett
- Posts: 463
- Joined: Mon Jan 07, 2019 12:32 am
- First Name: Erik
- Last Name: Barrett
- * REQUIRED* Type and Year of Model Ts owned: 1913 speedster 1924 touring 1925 dump truck
- Location: Auburn, Ca.
Re: Block and head test plate and gasket
Put me down for one.
-
pre15dale
- Posts: 146
- Joined: Sun Jan 06, 2019 7:28 pm
- First Name: Dale
- Last Name: Kemmerer
- * REQUIRED* Type and Year of Model Ts owned: 1909 touring 1911 open runabout
- Location: Medford, OR1909
Re: Block and head test plate and gasket
Las, Put me down for one also. Dale
-
Les Schubert
Topic author - Posts: 1319
- Joined: Thu Jan 10, 2019 5:47 pm
- First Name: Les
- Last Name: Schubert
- * REQUIRED* Type and Year of Model Ts owned: 27 roadster 13 touring
- Location: Calgary
Re: Block and head test plate and gasket
Dale
I have added one plate and two gaskets for you
Others, this project is now finished and closed off!!
I have added one plate and two gaskets for you
Others, this project is now finished and closed off!!