Does anyone know anything about Cal Cams?
I was looking through some Model T parts I have and notice a camshaft that had “Cal Cams 256 Brad” marked on it.
I measured the lift at .276. I suppose “Brad” was the Cam grinder.
Any information is appreciated,
Scott
Cal Cams
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 1191
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Cal Cams
Hi Tom- Cal Cams was located in Oakland, CA for many years and Brad was the original owners son. They have been out of business quite some time. Their cams were always decent quality and performed well. Although the business is gone, I'm still using several of their old grinds on my cams.
If you want more info, send me an e-mail. I may be able to get you specs for that grind.
Dan
If you want more info, send me an e-mail. I may be able to get you specs for that grind.
Dan