Page 1 of 1
Latest Project - Manhole Cover Tie Rod Bolts
Posted: Thu Oct 10, 2019 1:10 pm
by Scott_Conger
A good project while the snow was coming down 
Re: Latest Project - Manhole Cover Tie Rod Bolts
Posted: Thu Oct 10, 2019 4:43 pm
by Henry K. Lee
As always Scott super nice work!
Now it is time to shovel snow? You moved way to close to Santa’s North Pole!
LOL
Re: Latest Project - Manhole Cover Tie Rod Bolts
Posted: Thu Oct 10, 2019 5:00 pm
by Scott_Conger
Thanks Hank
We just got 3-4 inches along with 45MPH winds. It appears to have all blown to Denver
Re: Latest Project - Manhole Cover Tie Rod Bolts
Posted: Thu Oct 10, 2019 6:47 pm
by Ruxstel24
Those are way too pretty for a Model T Scott !!
And you just keep that snow over thataway...
Re: Latest Project - Manhole Cover Tie Rod Bolts
Posted: Thu Oct 10, 2019 7:44 pm
by Scott_Conger
Thanks, Dave
It was an interesting project and a natural variant to the kinpins I did a few weeks ago.
Re: Latest Project - Manhole Cover Tie Rod Bolts
Posted: Sat Oct 12, 2019 7:44 am
by Original Smith
Good project. Those are definitely needed. Perhaps next winter you can add the spindle bolts! As far as I know they were used in 1915-16.
Re: Latest Project - Manhole Cover Tie Rod Bolts
Posted: Sat Oct 12, 2019 11:19 am
by Erik Johnson
My unrestored May 1917 roadster originally had manhole cover oilers in the king pins and tie rod bolts.
However, the manhole covers are steel and not knurled.
I replaced the king pins and tie rod bolts because they were worn out but I still have them in my possession.