Speedometer-gear compatibly question

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Corey Walker
Posts: 196
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
Location: Brownsboro, TX

Speedometer-gear compatibly question

Post by Corey Walker » Fri Oct 25, 2019 2:05 pm

I’m building a speedster and have a cut off Overland touring body that this speedometer fits perfectly in a factory hole. I was wondering if this gear, 60 tooth 8 pitch, would be the correct gear used with a 1 1/2 to 1 swivel? If not which gear do I need?
Attachments
99BB048B-C448-4F8C-8AC4-84F0DA166B3C.jpeg
8522FB7D-AEC1-44D0-A899-FD04C04C8331.jpeg
Corey Walker, Brownsboro, Texas

User avatar

Mark Nunn
Posts: 287
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
Location: Bennington, NE
MTFCA Number: 50321
Board Member Since: 2017

Re: Speedometer-gear compatibly question

Post by Mark Nunn » Fri Oct 25, 2019 2:35 pm

Try searching the data in antiquespeedometer.com. They have a lot of information on their site.


John l
Posts: 48
Joined: Sun Jan 06, 2019 2:39 pm
First Name: John
Last Name: Leffler
Location: Lebanon Pa.17046
MTFCA Number: 22526

Re: Speedometer-gear compatibly question

Post by John l » Fri Oct 25, 2019 3:39 pm

Just ask Russ .

User avatar

Topic author
Corey Walker
Posts: 196
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
Location: Brownsboro, TX

Re: Speedometer-gear compatibly question

Post by Corey Walker » Fri Oct 25, 2019 4:09 pm

I meant 2 1/2- 1 swivel. I think I need a 58 tooth gear for 21” wheels. I’ve got Model A wheels on an Overland axle with a T frame so I can make any gear fit. I just happened to have the one already.
Corey Walker, Brownsboro, Texas

Post Reply Previous topicNext topic