Registration holder
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 45
- Joined: Sun Jan 06, 2019 9:04 pm
- First Name: Daniel
- Last Name: Brennan
- * REQUIRED* Type and Year of Model Ts owned: 1
- Location: New Jersey
Registration holder
I’m putting together a home made depot hack/huckster. I just received my reg and insurance cards. What are some ideas as to where to store these documents ?
-
- Posts: 324
- Joined: Sun Jan 06, 2019 2:15 pm
- First Name: George P
- Last Name: Clipner
- * REQUIRED* Type and Year of Model Ts owned: Late '26 Touring
- Location: LakeOzark,Missourah
- MTFCI Number: 18665
Re: Registration holder
I put them in a ziplock baggie and toss them under the seat.
-
- Posts: 4956
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Registration holder
Registration under the seat, insurance card in my wallet.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 1105
- Joined: Mon Jan 07, 2019 8:01 am
- First Name: Mark
- Last Name: Nunn
- * REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
- Location: Bennington, NE
- MTFCA Number: 50321
- Board Member Since: 2017
Re: Registration holder
I put mine in a small tin box under the seat. I used tin just in case a little critter gained entry. Truth is that I have a very good barn cat to keep them away so I'm not too worried about that.
-
- Posts: 64
- Joined: Sat May 11, 2019 2:24 am
- First Name: Eric
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1915 Speedster
- Location: San Diego
- MTFCA Number: 50994
- Board Member Since: 2019
Re: Registration holder
I use one of those vintage registration holders that fits around the steering column. I slide it all the way down so that it's out of sight as much as possible. Not the most secure place (anyone could grab it if they knew what it was/where it was), but I don't have to worry about forgetting paperwork.
-
- Posts: 2786
- Joined: Sun Jan 06, 2019 12:26 pm
- First Name: Dallas
- Last Name: Landers
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
- Location: N.E. Indiana
- MTFCA Number: 49995
Re: Registration holder
Mine is in the running board tool box in the RPU and under th seat in the TT.
-
Topic author - Posts: 45
- Joined: Sun Jan 06, 2019 9:04 pm
- First Name: Daniel
- Last Name: Brennan
- * REQUIRED* Type and Year of Model Ts owned: 1
- Location: New Jersey
Re: Registration holder
Thank you for all the great replies. I built my seat so it’s hinged and lockable. I guess I’ll try to find some sort of cool antique tin box to keep under there.
-
- Posts: 1181
- Joined: Mon Jan 07, 2019 10:27 am
- First Name: John
- Last Name: Codman
- * REQUIRED* Type and Year of Model Ts owned: 1927 Youring
- Location: Naples, FL 34120
Re: Registration holder
I have the registration card plastic laminated at Staples, then keep them under the rear floor mat of my touring car.