Installing modern front hub bearings
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Installing modern front hub bearings
What fancy tool do you all use to tighten the front bearings up with? Aside from a open end wrench sitting on the flats at a 90 degree angle. The bearings spin freely on the threads and I know how tight to make the bearings. The bearing flat ends up too deep in the hub to wrench it.
-
Topic author - Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: Installing modern front hub bearings
Forgot to mention. Late model wire wheel spindles. Looks like wood spoke hubs are easy.
-
- Posts: 166
- Joined: Sun Jan 06, 2019 11:13 pm
- First Name: Jim, Sr.
- Last Name: Rodell
- * REQUIRED* Type and Year of Model Ts owned: 1922 coupe, 1926 touring
- Location: Wisconsin
- MTFCA Number: 2406
- MTFCI Number: 22213
Re: Installing modern front hub bearings
If you had a hubcap wrench for 1926-27, Ford made a change to fit that condition.
1922 Coupe , 1926 Touring
-
Topic author - Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: Installing modern front hub bearings
More tools to buy
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Installing modern front hub bearings
Never a bad thing, Danny!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 468
- Joined: Tue Feb 26, 2019 9:09 pm
- First Name: Kenneth
- Last Name: DeLong
- * REQUIRED* Type and Year of Model Ts owned: 1914 touring,1915 roadster
- Location: Wheeler, MI
Re: Installing modern front hub bearings
To me it would seem easy and cheap to weld 2 pices of flat stock on a old/worn/or off shore socket!! Bud.
-
Topic author - Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: Installing modern front hub bearings
Great minds think alike!bud delong wrote: ↑Tue Dec 31, 2019 8:01 pmTo me it would seem easy and cheap to weld 2 pices of flat stock on a old/worn/or off shore socket!! Bud.