I'm going to make a couple sets of the jumbo transmission couplers in the very near future as I am needing one for a project I am working on. I was curious if anyone is needing a coupler set so I can get an idea of how many extra to make.
Also if there is anything else anyone may need or could think about needing that needs to be machined let me know as I have plenty availability on the milling machine right now.
Thanks
Billy
Jumbo transmission coupler and machining work
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
BillyBobsSpeedShop
Topic author - Posts: 59
- Joined: Fri Jan 18, 2019 11:29 pm
- First Name: Bill
- Last Name: Webb
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster, 1927 Roadster
- Location: Nc
-
jburns79se
- Posts: 14
- Joined: Tue Jan 08, 2019 2:11 pm
- First Name: James
- Last Name: Burns
- * REQUIRED* Type and Year of Model Ts owned: 1912 speedster
- Location: Groves, TX 77619
Re: Jumbo transmission coupler and machining work
Please call 409-962-2643, leave your number and I will return your call. Interested in 2 or 3 couplers. Or, jburns79se@aol.com J Burns