Need Dummy axle for cantrell miller sleeve puller

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
23ford
Posts: 161
Joined: Sun Jan 06, 2019 1:53 pm
First Name: Warren
Last Name: Webb
Location: Owasso OK

Need Dummy axle for cantrell miller sleeve puller

Post by 23ford » Sat Jan 04, 2020 3:36 pm

I need a dummy axle for the Cantrell Miller sleeve puller so I can remove sleeves out of a single housing. Someone told me that someone on here reproduced these. :D

User avatar

Pep C Strebeck
Posts: 519
Joined: Sun Jan 06, 2019 11:12 am
First Name: Joseph
Last Name: M
Location: MI
MTFCA Number: 0

Re: Need Dummy axle for cantrell miller sleeve puller

Post by Pep C Strebeck » Sat Jan 04, 2020 4:25 pm

I believe that it was Scott Conger that had made some. If you have an old won-out axle and a couple of 2" OD washers, you can make one:

IMG_6694_2.JPG
IMG_6695_2.JPG
IMG_6696_2.JPG

I had welded the washers together and than welded them to the cut off portion of the old worn out axle.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.

LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.

Post Reply Previous topicNext topic