Greetings All,
This exhaust manifold heater shroud needs to leave my shelf for a new home. I have no idea what engine it is for. It is not for any Ford that I am familiar with. It looks to fit onto an exhaust manifold on the left side of the engine, given the orientation of the cast in letters. I like to think that one of you will know what this will fit to. Someone could be pleased and warmed to have it.
Manufactured by the Remington Auto Heater Corp.
A view from the top.
From the inside.
The front opening.
Thank you for looking and I appreciate your input, Bill.
ID Needed Please, Unknown Manifold Heater Shroud
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 222
- Joined: Sun Jan 06, 2019 11:15 am
- First Name: Bill
- Last Name: Harper
- * REQUIRED* Type and Year of Model Ts owned: '14 Touring, '20 TT Farm Truck, '24 TT Depot Hack, '24 Coupe, and a 1914 Metz Model 22 Torpedo Runabout
- Location: Keene, New Hampshire
- MTFCA Number: 5414
- MTFCA Life Member: YES
- Board Member Since: 1999
-
- Posts: 3384
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- * REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
- Location: Norwalk Ohio
Re: ID Needed Please, Unknown Manifold Heater Shroud
I think it’s for an early Chevrolet , Bill. Good luck, fun item !
-
- Posts: 5460
- Joined: Tue Jan 08, 2019 4:56 pm
- First Name: Frank
- Last Name: Brandi
- * REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
- Location: Moline IL
- Board Member Since: 2018
Re: ID Needed Please, Unknown Manifold Heater Shroud
Forensics questions.
One would expect that the manufactures company name would be upright when mounted.
Would it sit on top of a manifold or the side of it. Then what side of the engine left or right?
How would this be attached to a manifold or whatever - there are no bolt holes.
One would expect that the manufactures company name would be upright when mounted.
Would it sit on top of a manifold or the side of it. Then what side of the engine left or right?
How would this be attached to a manifold or whatever - there are no bolt holes.
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger
Mick Jagger
-
- Posts: 3384
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- * REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
- Location: Norwalk Ohio
Re: ID Needed Please, Unknown Manifold Heater Shroud
Here is a different brand, but you can see the similar fit.
-
Topic author - Posts: 222
- Joined: Sun Jan 06, 2019 11:15 am
- First Name: Bill
- Last Name: Harper
- * REQUIRED* Type and Year of Model Ts owned: '14 Touring, '20 TT Farm Truck, '24 TT Depot Hack, '24 Coupe, and a 1914 Metz Model 22 Torpedo Runabout
- Location: Keene, New Hampshire
- MTFCA Number: 5414
- MTFCA Life Member: YES
- Board Member Since: 1999
Re: ID Needed Please, Unknown Manifold Heater Shroud
Hello Tim,
Well, that does look to be "same church, different pew." Thank you so very much.
I wondered if it was for "one of them Bow Tie cars." Now to see if it can find a new home. This forum and all of its members is a wealth of knowledge. Thank you again, Bill
Well, that does look to be "same church, different pew." Thank you so very much.
I wondered if it was for "one of them Bow Tie cars." Now to see if it can find a new home. This forum and all of its members is a wealth of knowledge. Thank you again, Bill
-
- Posts: 3678
- Joined: Sun Jan 06, 2019 3:13 pm
- First Name: Wayne
- Last Name: Sheldon
- * REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
- Location: Grass Valley California, USA
- Board Member Since: 2005
Re: ID Needed Please, Unknown Manifold Heater Shroud
I would imagine that the "bump-out" should correspond with a bump-out on the exhaust manifold. Since it is near one end of the shroud, not the other, and most intake/exhaust manifold combinations have such bump-outs near the middle where the exhaust is used to warm the crude gasoline of the day, I would surmise that it would be for a six cylinder engine. '20s Buicks were common sixes, but there were many others. And it could be for a '29/'30 Chevrolet?
Just a couple thoughts.
Just a couple thoughts.