Shortened driveshaft , driveshaft tube, and rear radius rods
-
Topic author - Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Shortened driveshaft , driveshaft tube, and rear radius rods
WTB: Anyone have a 12" shortened driveshaft and driveshaft tube suitable for installing a Warford in a late T (27). I think 12" shorter is what is needed. Could ude a pair of shortened rear radius rods for a 26-27, also. Alternatively, I'll have to have mine shortened.
-
- Posts: 1191
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
I have a shortened drive, tube and radius rods. I will check the length. Is this for an aluminum Warford or a cast iron one with the front u-joint?
-
Topic author - Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
Aluminum, Dan. Thanks for checking.
-
- Posts: 1191
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
Terry- the drive shaft looks to be shortened 16½", so it won't work for your Warford. Too bad- it has radius rods as well. Perhaps someone else can use it. Dan
-
- Posts: 141
- Joined: Sun Jan 06, 2019 2:46 pm
- First Name: Tim
- Last Name: Williams
- * REQUIRED* Type and Year of Model Ts owned: 1925 Model T Speedster, 1922 Model t Speedster project
- Location: Hillsboro, OR
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
Dan would the shortened drive shaft you have work on a Chicago transmission?
Tim
Tim
-
- Posts: 1191
- Joined: Sun Jan 06, 2019 11:08 am
- First Name: DAN
- Last Name: MCEACHERN
- * REQUIRED* Type and Year of Model Ts owned: too many. '14 touring, 2 depot hacks, 2 speedsters
- Location: ALAMEDA,CA,USA
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
Tim- no, a Chicago is about the same length as an aluminum Warford. I can measure a Chicago and report back.
-
Topic author - Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
Anyone else have a 12" shortened driveshaft , tube, and rear radius rods?
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
I can modify yours as I am out of cores, for $325.00 plus all shipping cost.
Hank
Hank
-
- Posts: 65
- Joined: Thu Jan 17, 2019 6:55 pm
- First Name: James
- Last Name: Rodell
- Location: Kewaskum
- MTFCA Number: 14035
- MTFCI Number: 13594
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
Birdhaven bought the Texas T Parts business and is a dealer for the Layne K.C. Warford. They sell new driveshafts which are 12" shorter and offer the service of shortening the driveshaft housing for their transmission purchasers. You could check with them.
-
Topic author - Posts: 1063
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: Shortened driveshaft , driveshaft tube, and rear radius rods
There's a machine shop down here in Texas close enough to me to avoid shipping costs, but I was just hoping someone had what I needed, extra to their needs and cheaper than the machine shop.