Boring bars

Post parts wanted or for sale here

Topic author
Ralph F
Posts: 39
Joined: Wed Jan 09, 2019 7:09 pm
First Name: Ralph
Last Name: Fitz-Gerald
Location: Monkton, Vermont

Boring bars

Post by Ralph F » Fri Feb 07, 2020 2:37 pm

[image][/image][image][image][/image][/image]I have two crank shaft aligning reamers. The first one is Steven reamer part#3031-2-3-9. The second one was manufactured by Mayhew part# 3031-2-3. The price on the Stevens is$75 plus postage. The price on the Mayhew is $65 plus postage. Both of these reamer have been stored in wooden boxes. The cutter have been wrap in grease soaked rags.
Thanks
Fitz
Attachments
image.jpg
image.jpg


Topic author
Ralph F
Posts: 39
Joined: Wed Jan 09, 2019 7:09 pm
First Name: Ralph
Last Name: Fitz-Gerald
Location: Monkton, Vermont

Re: Boring bars

Post by Ralph F » Sat Feb 08, 2020 4:16 pm

New price $75 for both plus postage.
Fitz


Ahr
Posts: 5
Joined: Wed Jan 09, 2019 9:57 pm
First Name: Adam
Last Name: Hubacz
Location: North Brookfield Massachusetts

Re: Boring bars

Post by Ahr » Sat Feb 08, 2020 5:42 pm

Email sent


mike atkins
Posts: 4
Joined: Mon Jan 07, 2019 10:31 am
First Name: mike
Last Name: atkins
Location: tulsa, ok

Re: Boring bars

Post by mike atkins » Mon Feb 10, 2020 3:58 pm

Are the Reamers still available?

Post Reply Previous topicNext topic