Page 1 of 1

FS: Speedster steering column, brass

Posted: Wed Feb 12, 2020 8:30 pm
by Chad_Marcheese
.

SOLD SOLD SOLD!


Steering column from a speedster project that changed direction.
Length is still standard, so can be used in regular car
New pitman arm
New key
New nut
New grease cup.
Excellent used timing / spark rods
New control rod springs and cups
New gears (4:1)
New brass quadrant
New brass nut for the steering wheel
Polished gear case (black originally)
Paint has been sanded back for second coat (Black appliance paint)
Brass could use some finer finishing and polishing
Steering bracket (T932-B) has been rebushed.

This column needs very little finishing touches to complete. $200 plus shipping.

I go off the first person that contacts me by IM or email (safest bet) crazydart400 AT yahoo DOT com. Paypal is preferred, will also accept check or M/O but will have to clear first.
Column 1.jpeg
Column 1.jpeg (98.39 KiB) Viewed 1682 times
Column 2.jpeg
Column 2.jpeg (106.39 KiB) Viewed 1682 times
Column 3.jpeg
Column 3.jpeg (66.63 KiB) Viewed 1682 times
Column 4.jpeg
Column 4.jpeg (101.96 KiB) Viewed 1682 times
Column 5.jpeg
Column 5.jpeg (86.68 KiB) Viewed 1682 times

Re: FS: Speedster steering column, brass

Posted: Wed Feb 12, 2020 8:30 pm
by Chad_Marcheese
Column 6.jpeg
Column 6.jpeg (70.91 KiB) Viewed 1681 times

Re: FS: Speedster steering column, brass

Posted: Wed Feb 12, 2020 8:41 pm
by jawa
Email sent