Cast iron Holley G carburetor, 18-19. Consider this a core or project. No cracks or damage that I can find, no bowl either. I do not think that the float that is shown is original to the carburetor, but it goes with it. There is an existing float hinge on the carburetor body. Price is $28.50, shipped anywhere in the United States by USPS Priority Mail.
Windshield swing arms, 1926-1927 (possibly early Model A, no-notch). Original brass swing arms, fair plating, no cracks or groves worn into them. Price is $18.50, shipped anywhere in the United States by USPS Priority Mail.
Older and used, Watts outer rear axle seals. These were removed during a recent rear axle rebuild, I used the original style. Before I cleaned the grease off you could see WATTS printed on the sides. The seals have been replaced with new Timken (National) seals but the inner O-rings have not been replaced. Nothing was leaking when they were taken off. Price is $28.50, shipped anywhere in the United States by USPS Priority Mail.
If you would like to see any other photos or have any questions, please do not hesitate to ask. Please use the Private Message feature here on the Forum to contact me. E-mails that are sent to me from Forum members always end up in my Spam Folder for some reason, and I may not see it. Accepted payment methods are USPS Postal Money Order (preferred), Check and Paypal (accepted but not preferred). Thank you for looking, Joe.
FS, Holley G, Windshield Swing Arms, Outer Rear Axle Seals.
-
Topic author - Posts: 517
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
FS, Holley G, Windshield Swing Arms, Outer Rear Axle Seals.
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
Topic author - Posts: 517
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: FS, Holley G, Windshield Swing Arms, Outer Rear Axle Seals.
Some more photos:
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
-
- Posts: 621
- Joined: Sun Jan 06, 2019 12:47 pm
- First Name: Frank
- Last Name: Seress
- * REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
- Location: Prescott, Arizona
- MTFCA Number: 27707
Re: FS, Holley G, Windshield Swing Arms, Outer Rear Axle Seals.
Joseph, I will take the rear axle seals. Sent you a p.m. Frank
-
Topic author - Posts: 517
- Joined: Sun Jan 06, 2019 11:12 am
- First Name: Joseph
- Last Name: M
- Location: MI
- MTFCA Number: 0
Re: FS, Holley G, Windshield Swing Arms, Outer Rear Axle Seals.
Seals will be on their way to Frank, THANK YOU!
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.
LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.