13/32x16 Tap update
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
13/32x16 Tap update
I have sent, I hope all the people that reserved a tap total for payment. Most have sent payment and I have shipped them a tap.
Some have not sent payment or a reply about payment. If you were in the first batch of people that reserved a tap and got total notice please pay or tell me to pass your tap on to someone else.
I will wait one week from today and then I will open the extra taps to anyone that wants one.
If you did not get a total, let me know and I will take care of that. I may have overlooked someone. There were a lot of names to kept up with.
One week from today 3/28/20, I will post how many taps are left.
Email me at address in pictures. Thanks Dan
Some have not sent payment or a reply about payment. If you were in the first batch of people that reserved a tap and got total notice please pay or tell me to pass your tap on to someone else.
I will wait one week from today and then I will open the extra taps to anyone that wants one.
If you did not get a total, let me know and I will take care of that. I may have overlooked someone. There were a lot of names to kept up with.
One week from today 3/28/20, I will post how many taps are left.
Email me at address in pictures. Thanks Dan
-
- Posts: 373
- Joined: Tue Jun 25, 2019 8:00 pm
- First Name: Chris
- Last Name: Haynes
- * REQUIRED* Type and Year of Model Ts owned: 1921 Runabout
- Location: Camarillo. CA
- Board Member Since: 2019
Re: 13/32x16 Tap update
Where are they used?
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32x16 Tap update
Rear end, bolts for driveshaft tube.
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32x16 Tap update
Back to the top
-
- Posts: 39
- Joined: Tue Jan 08, 2019 8:10 am
- First Name: Jonathan
- Last Name: Bodine
- Location: Tropical, Montana
- MTFCA Number: 4006
Re: 13/32x16 Tap update
Hello Dan:
In need of the tap. Let me know the price; can I send you a check? Thanks.
Best regards,
Jonathan Bodine
In need of the tap. Let me know the price; can I send you a check? Thanks.
Best regards,
Jonathan Bodine
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32x16 Tap update
Back to top
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32x16 Tap update
I have had one person that did not get his total email. If there are any others, you need to email by the 28th or your tap will be on the open market.
Again I tried to get email with total to everyone, but sometimes I may have missed someone. It was an accident if I did.
So, if you missed getting a total email ASAP.
Thanks Dan
Again I tried to get email with total to everyone, but sometimes I may have missed someone. It was an accident if I did.
So, if you missed getting a total email ASAP.
Thanks Dan
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32x16 Tap update
Bringing back to the top
-
Topic author - Posts: 4110
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: 13/32x16 Tap update
One more day and then I will list remaining taps for sale. If you did not get total or forget to send it last chance. Thanks Dan