PFS 2 early ENGINE PANS your choice

Post parts wanted or for sale here

Topic author
sgfmodelt
Posts: 6
Joined: Thu Jan 24, 2019 10:02 am
First Name: steve
Last Name: farley
Location: lapeer MI.

PFS 2 early ENGINE PANS your choice

Post by sgfmodelt » Thu May 21, 2020 7:04 am

Two engine pans. aprox. 1914. Your choice. Both have been tiny spot welded on a pinhole or crack. One pan had one of the engine support arms replaced years ago. Both pans have been sand blasted, primed and painted on the outside. Oil soaked on the inside to prevent rusting. Both three rivet arms. The pan with the replaced arm was probably the best as there was no to very little rust. The other had surface rust in places but nothing like you usually find. Both very good pans. Local pick up at present. Would ship through "Fastenal" Nut and Bolt Co. when they resume. They have stopped their shipping because of the virous. Their sideline shipping "large parts on a pallet" price is reasonable compared to the others.
$500.00 for either one. Your choice.
sgfmodelt@hotmail.com
810-664-1287
Attachments
thumbnail_20200520_110112 #1.jpg
thumbnail_20200520_110032 #2.jpg
arm replaced years ago
arm replaced years ago
thumbnail_20200520_105606 #5.jpg
thumbnail_20200520_105220 #6.jpg


Topic author
sgfmodelt
Posts: 6
Joined: Thu Jan 24, 2019 10:02 am
First Name: steve
Last Name: farley
Location: lapeer MI.

Re: PFS 2 early ENGINE PANS your choice

Post by sgfmodelt » Fri May 29, 2020 6:23 pm

Two engine pans. aprox. 1914. Your choice. Both have been tiny spot welded on a pinhole or crack. One pan had one of the engine support arms replaced years ago. Both pans have been sand blasted, primed and painted on the outside. Oil soaked on the inside to prevent rusting. Both three rivet arms. The pan with the replaced arm was probably the best as there was no to very little rust. The other had surface rust in places but nothing like you usually find. Both very good pans. Local pick up at present. Would ship through "Fastenal" Nut and Bolt Co. when they resume. They have stopped their shipping because of the virous. Their sideline shipping "large parts on a pallet" price is reasonable compared to the others.
$500.00 for either one. Your choice.
sgfmodelt@hotmail.com
810-664-1287


Villijussi
Posts: 5
Joined: Sun Jan 26, 2020 3:41 pm
First Name: John
Last Name: Westerinen
Location: Mass City

Re: PFS 2 early ENGINE PANS your choice

Post by Villijussi » Sat May 30, 2020 1:30 pm

Are they straightened?

Post Reply Previous topicNext topic