Backordered NH Float Valve Install tools available - Last Call
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Backordered NH Float Valve Install tools available - Last Call
If you believe you are on my "Wait List" and have NOT received a personal email from me this AM, then I've screwed up and have lost your contact info and ask that you let me know. In any event I have some in stock and am waiting to hear from you. Thank you.
Last edited by Scott_Conger on Thu Jul 02, 2020 10:01 pm, edited 1 time in total.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Backordered NH Float Valve Install tools available - Limited Supply
If you don’t have one of these, GET one. Best thing since , well you know. Dan
-
- Posts: 535
- Joined: Sun Jan 06, 2019 2:51 pm
- First Name: Terry & Sharon
- Last Name: Miller
- * REQUIRED* Type and Year of Model Ts owned: 1920 Center Door, 1920 TTWood cab Farm Truck with cable dump grain bed, 1920 TT C-Cab with express bed, 1927 Wood body Dairy Delivery truck
- Location: Westminster, CO
- MTFCA Number: 32583
- Board Member Since: 2017
Re: Backordered NH Float Valve Install tools available - Limited Supply
I have one of these and Scott did a great job making a great tool. You can't go wrong here.
Good Luck,
Terry
Good Luck,
Terry
-
- Posts: 88
- Joined: Sun Jan 06, 2019 5:04 pm
- First Name: Kenneth
- Last Name: LeBlanc
- * REQUIRED* Type and Year of Model Ts owned: 27 coupe 23 touring 26 TT Snowmobile 22 TT Dump Truck 26 Fordoor
- Location: Atkinson NH 03811
- MTFCA Number: 25458
Re: Backordered NH Float Valve Install tools available - Limited Supply
Scott if you have any extras I would like one thanks,Ken
-
- Posts: 235
- Joined: Sun Jan 06, 2019 1:53 pm
- First Name: Dan
- Last Name: Blaydon
- * REQUIRED* Type and Year of Model Ts owned: 1923 Touring
- Location: PA
Re: Backordered NH Float Valve Install tools available - Limited Supply
Nice work Scott.
1923 Touring
-
- Posts: 4
- Joined: Sat Apr 11, 2020 1:23 pm
- First Name: George
- Last Name: Jones
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Healdsburg CA
- MTFCA Number: 23068
Re: Backordered NH Float Valve Install tools available - Limited Supply
Scott:
Misplaced my notes etc on this tool. Again the total cost and what is your address for mailing to.
G.Jones p.o.box 1613 Healdsburg Ca. 95448
grjmerc@gmail.com
Misplaced my notes etc on this tool. Again the total cost and what is your address for mailing to.
G.Jones p.o.box 1613 Healdsburg Ca. 95448
grjmerc@gmail.com
-
- Posts: 194
- Joined: Sun Jan 06, 2019 11:31 pm
- First Name: Ricky
- Last Name: Williams
- * REQUIRED* Type and Year of Model Ts owned: 11 Torpedo, 12 Com. Rdstr, 12 Delivery, 2-12 Tou, 15 Tou, 21 Cpe, 25 Cpe 25 TT, 26 TT, 27TT, 26 PU, 26 Tou, 2-26 4dr, 26 Del, 27 4dr
- Location: Humboldt, TN
- MTFCA Number: 28991
- MTFCI Number: 23852
- Contact:
Re: Backordered NH Float Valve Install tools available - Limited Supply
I would like to have one. Email Sent
Richard Williams, Humboldt, TN
President, Tennessee T's inc.
President, Tennessee T's inc.
-
- Posts: 979
- Joined: Mon Jan 07, 2019 5:42 pm
- First Name: Stan
- Last Name: Howe
- * REQUIRED* Type and Year of Model Ts owned: 2
- Location: Helena, MT
- MTFCA Number: 19133
- Board Member Since: 1999
Re: Backordered NH Float Valve Install tools available - Limited Supply
Scott, I'm glad you're making those, Jack Daron made a zillion of them and sold them and gave them away. He is long gone and I don't know of anybody making them other than you.
I can't see the handle end but I'm going to make a suggestion if you haven't already thought of it.
Center drill the handle end for a tapered or pointed punch or whatever that will fit in the chuck on a drill press.
Hold the carb in a vise on the table, insert the tool, line it up with the chuck with the taper (A center punch works great) and put down pressure from the drill press on the tool while you are removing the seat. It will stop it from slipping and jumping out of the slot.
An alternative is to reduce the diameter on the handle end to 3/8 so it will fit in virtually any drill press chuck. Clamp it in, put down pressure on it and it will remove the seat.
I have probably a dozen different chisels ground to specific sizes for removing seats from carbs. It has to be one of the best things I ever thought of doing.
I can't see the handle end but I'm going to make a suggestion if you haven't already thought of it.
Center drill the handle end for a tapered or pointed punch or whatever that will fit in the chuck on a drill press.
Hold the carb in a vise on the table, insert the tool, line it up with the chuck with the taper (A center punch works great) and put down pressure from the drill press on the tool while you are removing the seat. It will stop it from slipping and jumping out of the slot.
An alternative is to reduce the diameter on the handle end to 3/8 so it will fit in virtually any drill press chuck. Clamp it in, put down pressure on it and it will remove the seat.
I have probably a dozen different chisels ground to specific sizes for removing seats from carbs. It has to be one of the best things I ever thought of doing.
-
- Posts: 89
- Joined: Tue Jan 28, 2020 8:45 am
- First Name: Marty
- Last Name: Ray
- * REQUIRED* Type and Year of Model Ts owned: 1916 Runabout, 1922 Roadster
- Location: Texas
- MTFCA Number: 50870
- MTFCI Number: 25240
Re: Backordered NH Float Valve Install tools available - Limited Supply
I would like one. Email sent
-
- Posts: 83
- Joined: Mon Jan 07, 2019 9:22 pm
- First Name: David
- Last Name: Houston
- * REQUIRED* Type and Year of Model Ts owned: 13,14,19,21,&etc
- Location: WNC
- MTFCA Number: 32227
- MTFCI Number: 23901
Re: Backordered NH Float Valve Install tools available - Limited Supply
I am with "MovingOn" The total cost
Thanks
davids
Thanks
davids
-
- Posts: 168
- Joined: Mon Jan 28, 2019 4:49 pm
- First Name: Don
- Last Name: Kirtley
- * REQUIRED* Type and Year of Model Ts owned: 13 and 16 touring, 18 and 20 coup, 20 tudor
- Location: Devore, CA
- MTFCA Number: 23703
- MTFCI Number: 23153
- Board Member Since: 2009
Re: Backordered NH Float Valve Install tools available - Limited Supply
Scott. Put me down for one Please
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Backordered NH Float Valve Install tools available - Limited Supply
I appreciate folks interest. However, I can only keep track of what I need to have ready at a given time, or perform follow-up communication unless folks will send me an email (not a PM).
Please send an email if you have not heard from me yet.
And if anyone is wondering, based on response, I made more and they are available. Metal shipping costs is a killer and the more metal you buy, the price reduction on material pales in comparison to increase in shipping costs, so I do NOT stock a lot of material and do not have infinite capacity to make product to let it sit on the shelf, so if you're interested in one, I have some, and now is the time to ask.
Right now, they are $40 each to your door.
As always, thank you very much.
Please send an email if you have not heard from me yet.
And if anyone is wondering, based on response, I made more and they are available. Metal shipping costs is a killer and the more metal you buy, the price reduction on material pales in comparison to increase in shipping costs, so I do NOT stock a lot of material and do not have infinite capacity to make product to let it sit on the shelf, so if you're interested in one, I have some, and now is the time to ask.
Right now, they are $40 each to your door.
As always, thank you very much.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Backordered NH Float Valve Install tools available - Limited Supply
About 2/3 of the folks who have expressed an interest in these have contacted me but of those, few have followed up. Thus, I have my entire last production run available as well as some of the originals that generated this ad. I made more based on responses and they're sitting on the shelf. They're not listed by dealers and I don't offer a catalogue. If I have stuff, I have stuff and when it's gone, it's gone.
thanks for looking, and please contact me via EMAIL for my address.
thanks for looking, and please contact me via EMAIL for my address.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Backordered NH Float Valve Install tools available - Limited Supply
Once more. These are worth every penny. If you ever change a float valve, get one. Thanks for making these.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Backordered NH Float Valve Install tools available - Limited Supply
Last call to buy
There is no point bumping over the myriad of ads that are posted
After July 4, they will be available only as an option when buying Full Flow Float Valves, and not by themselves.
Please email me directly if you are interested
There is no point bumping over the myriad of ads that are posted
After July 4, they will be available only as an option when buying Full Flow Float Valves, and not by themselves.
Please email me directly if you are interested
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured