Backordered NH Float Valve Install tools available - Limited Supply

Post parts wanted or for sale here

Topic author
Scott_Conger
Posts: 2667
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

Backordered NH Float Valve Install tools available - Limited Supply

Post by Scott_Conger » Wed Jun 10, 2020 1:41 pm

If you believe you are on my "Wait List" and have NOT received a personal email from me this AM, then I've screwed up and have lost your contact info and ask that you let me know. In any event I have some in stock and am waiting to hear from you. Thank you.
Float Valve install_removal tool.gif
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Dan Hatch
Posts: 926
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by Dan Hatch » Wed Jun 10, 2020 2:34 pm

If you don’t have one of these, GET one. Best thing since , well you know. Dan


mtntee20
Posts: 196
Joined: Sun Jan 06, 2019 2:51 pm
First Name: Terry & Sharon
Last Name: Miller
Location: Westminster, CO
MTFCA Number: 32583
Board Member Since: 2017

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by mtntee20 » Wed Jun 10, 2020 4:28 pm

I have one of these and Scott did a great job making a great tool. You can't go wrong here.

Good Luck,
Terry


kenhaverhill
Posts: 46
Joined: Sun Jan 06, 2019 5:04 pm
First Name: Kenneth
Last Name: LeBlanc
Location: Haverhill Ma.

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by kenhaverhill » Wed Jun 10, 2020 6:06 pm

Scott if you have any extras I would like one thanks,Ken

User avatar

Dan B
Posts: 125
Joined: Sun Jan 06, 2019 1:53 pm
First Name: Dan
Last Name: Blaydon
Location: PA

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by Dan B » Wed Jun 10, 2020 6:23 pm

Nice work Scott.
1923 Touring


MovingOn
Posts: 4
Joined: Sat Apr 11, 2020 1:23 pm
First Name: George
Last Name: Jones
Location: Healdsburg CA
MTFCA Number: 23068

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by MovingOn » Wed Jun 10, 2020 6:43 pm

Scott:

Misplaced my notes etc on this tool. Again the total cost and what is your address for mailing to.

G.Jones p.o.box 1613 Healdsburg Ca. 95448
grjmerc@gmail.com

User avatar

rnwilliams
Posts: 94
Joined: Sun Jan 06, 2019 11:31 pm
First Name: Richard (Ricky)
Last Name: Williams
Location: Humboldt, TN
MTFCA Number: 28991
MTFCI Number: 23852
Contact:

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by rnwilliams » Wed Jun 10, 2020 7:06 pm

I would like to have one. Email Sent
Richard Williams, Humboldt, TN
President, Tennessee T's inc.


StanHowe
Posts: 613
Joined: Mon Jan 07, 2019 5:42 pm
First Name: Stan
Last Name: Howe
Location: Helena, MT
MTFCA Number: 19133
Board Member Since: 1999

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by StanHowe » Thu Jun 11, 2020 3:12 pm

Scott, I'm glad you're making those, Jack Daron made a zillion of them and sold them and gave them away. He is long gone and I don't know of anybody making them other than you.

I can't see the handle end but I'm going to make a suggestion if you haven't already thought of it.

Center drill the handle end for a tapered or pointed punch or whatever that will fit in the chuck on a drill press.

Hold the carb in a vise on the table, insert the tool, line it up with the chuck with the taper (A center punch works great) and put down pressure from the drill press on the tool while you are removing the seat. It will stop it from slipping and jumping out of the slot.

An alternative is to reduce the diameter on the handle end to 3/8 so it will fit in virtually any drill press chuck. Clamp it in, put down pressure on it and it will remove the seat.

I have probably a dozen different chisels ground to specific sizes for removing seats from carbs. It has to be one of the best things I ever thought of doing.


VinTin23
Posts: 5
Joined: Tue Jan 28, 2020 8:45 am
First Name: D
Last Name: Martine
Location: Texas

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by VinTin23 » Thu Jun 11, 2020 7:17 pm

I would like one. Email sent


Pops
Posts: 50
Joined: Mon Jan 07, 2019 9:22 pm
First Name: David
Last Name: Houston
Location: WNC
MTFCA Number: 32227
MTFCI Number: 23901

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by Pops » Thu Jun 11, 2020 7:39 pm

I am with "MovingOn" The total cost
Thanks
davids


FordFool
Posts: 71
Joined: Mon Jan 28, 2019 4:49 pm
First Name: Don
Last Name: Kirtley
Location: Devore,Ca
MTFCA Number: 23703
MTFCI Number: 23153
Board Member Since: 2009

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by FordFool » Fri Jun 12, 2020 8:39 pm

Scott. Put me down for one Please


Topic author
Scott_Conger
Posts: 2667
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by Scott_Conger » Sat Jun 20, 2020 6:12 pm

I appreciate folks interest. However, I can only keep track of what I need to have ready at a given time, or perform follow-up communication unless folks will send me an email (not a PM).

Please send an email if you have not heard from me yet.

And if anyone is wondering, based on response, I made more and they are available. Metal shipping costs is a killer and the more metal you buy, the price reduction on material pales in comparison to increase in shipping costs, so I do NOT stock a lot of material and do not have infinite capacity to make product to let it sit on the shelf, so if you're interested in one, I have some, and now is the time to ask.

Right now, they are $40 each to your door.

As always, thank you very much.
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Topic author
Scott_Conger
Posts: 2667
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
Location: Clark, WY
Board Member Since: 2005

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by Scott_Conger » Thu Jun 25, 2020 2:02 pm

About 2/3 of the folks who have expressed an interest in these have contacted me but of those, few have followed up. Thus, I have my entire last production run available as well as some of the originals that generated this ad. I made more based on responses and they're sitting on the shelf. They're not listed by dealers and I don't offer a catalogue. If I have stuff, I have stuff and when it's gone, it's gone.

thanks for looking, and please contact me via EMAIL for my address.
Scott Conger

Full Flow Float Valves - deliver fuel like Henry intended!


Dan Hatch
Posts: 926
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Backordered NH Float Valve Install tools available - Limited Supply

Post by Dan Hatch » Fri Jun 26, 2020 8:44 am

Once more. These are worth every penny. If you ever change a float valve, get one. Thanks for making these.

Post Reply Previous topicNext topic