I had to make several for myself, so while I was set up, I made 1 spare throttle shaft. If you need one, and your carb has a .032" thick throttle plate, this is what you want. Additionally, it comes with the correct screws, so no need to reuse the boogered up old ones.
HINT: if the throttle plate is the SAME thickness as the choke plate, you have the .032" version, and this is the shaft you want...if your throttle plate is a LOT THICKER (.063) then you do NOT want this shaft.
Picture shows 2, but only 1 is for sale.
EMAIL if interested.
Thank you.
No Longer For Sale - One (1) Stromberg OF Throttle shaft for .032" thick throttle plate
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
No Longer For Sale - One (1) Stromberg OF Throttle shaft for .032" thick throttle plate
Last edited by Scott_Conger on Sat Jun 27, 2020 10:36 pm, edited 2 times in total.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 124
- Joined: Sun Feb 24, 2019 4:29 pm
- First Name: Chris
- Last Name: Rini
- * REQUIRED* Type and Year of Model Ts owned: 1923 roadster
- Location: Huntington Beach CA
Re: For Sale - One (1) Stromberg OF Throttle shaft for .032" thick throttle plate
Unsolicited testimonial: I've got one of these, and Scott's workmanship is gorgeous.
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale - One (1) Stromberg OF Throttle shaft for .032" thick throttle plate
Thanks Chris
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale - One (1) Stromberg OF Throttle shaft for .032" thick throttle plate
I'll bump this once or twice and then it'll be gone. If you're rebuilding a Stromberg OF and not replacing this part, you're not really rebuilding it. As a suggestion, if you think you'll need this in the future, you might want to act. Demand is understandably low, and I will not tool up to make one as a request...only as part of a production run and for now, this is it.
thanks, everyone, for looking.
thanks, everyone, for looking.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: For Sale - One (1) Stromberg OF Throttle shaft for .032" thick throttle plate
OK
last time
say buh-buy
back on the shelf and add this to the "no one wants one" list...not that I'm at all surprised. I'll use it soon enough and will be greatful I don't have to set up to make it.
thanks for looking
last time
say buh-buy
back on the shelf and add this to the "no one wants one" list...not that I'm at all surprised. I'll use it soon enough and will be greatful I don't have to set up to make it.
thanks for looking
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured