Chassis parts for Hay Wagon to Speedster project wanted.

Post parts wanted or for sale here
User avatar

Topic author
ivaldes1
Posts: 913
Joined: Mon Jan 07, 2019 1:32 am
First Name: Ignacio
Last Name: Valdes
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, Tx
MTFCA Number: 50406
Board Member Since: 2016

Chassis parts for Hay Wagon to Speedster project wanted.

Post by ivaldes1 » Sun Jul 05, 2020 12:10 pm

Hi, I need the following chassis parts for Hay Wagon to Speedster project https://mtfca.com/phpBB3/viewtopic.php?f=2&t=13134 Will be driving Houston to Mount Rushmore South Dakota 07/10/2020 and back 07/15/2020

Running board mounts and steel strap that holds them up.
Battery holder.
Drag link.
All parts of the brake lever including the mounts and the thing with the teeth.
Steering column, steering wheel.
Rear axles, my key ways are worn out.

Anything else I might need that I haven't thought of yet...

User avatar

Henry K. Lee
Posts: 5339
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
* REQUIRED* Type and Year of Model Ts owned: Many
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: Chassis parts for Hay Wagon to Speedster project wanted.

Post by Henry K. Lee » Sun Jul 05, 2020 12:23 pm

Have it all, less steering column!

Hank

User avatar

Topic author
ivaldes1
Posts: 913
Joined: Mon Jan 07, 2019 1:32 am
First Name: Ignacio
Last Name: Valdes
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, Tx
MTFCA Number: 50406
Board Member Since: 2016

Re: Chassis parts for Hay Wagon to Speedster project wanted.

Post by ivaldes1 » Sun Jul 05, 2020 12:32 pm

Great! Now how to get it? I will be heading Houston Texas to South Dakota next week but South Pittsburg is a ways off East...


Model T Mark
Posts: 235
Joined: Mon Jan 07, 2019 8:00 pm
First Name: Mark
Last Name: Eyre
* REQUIRED* Type and Year of Model Ts owned: 1913 Touring 1914 Touring and Roadster 1915 Touring 1926 Roadster
Location: Battle Creek Michigan

Re: Chassis parts for Hay Wagon to Speedster project wanted.

Post by Model T Mark » Sun Jul 05, 2020 12:56 pm

I have a hand brake quadrant with four holes that mount to the frame good teeth. Yours for the cost of shipping.
meyre14t@yahoo.com

User avatar

TRDxB2
Posts: 5407
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
Location: Moline IL
Board Member Since: 2018

Re: Chassis parts for Hay Wagon to Speedster project wanted.

Post by TRDxB2 » Sun Jul 05, 2020 1:55 pm

You might consider a drive by stop at Model T Haven in Iola, KS. Not to far off your path.
https://modelthaven.com/component/conte ... Itemid=130
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger

User avatar

Topic author
ivaldes1
Posts: 913
Joined: Mon Jan 07, 2019 1:32 am
First Name: Ignacio
Last Name: Valdes
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, Tx
MTFCA Number: 50406
Board Member Since: 2016

Re: Chassis parts for Hay Wagon to Speedster project wanted.

Post by ivaldes1 » Fri Jul 10, 2020 1:56 am

Planning on stopping into Model T Haven. Here is my current list of parts wanted:

Running board mounts and steel strap that holds them up.
Battery holder.
Drag link.
All parts of the brake lever including the mounts and the quadrant.
Steering column, steering wheel.
Rear axles, my key ways are worn out.
Motor shelves -- also have to figure out how to do the transition on the front chassis brackets.
Nice key switch
Coil box enclosure and coil boxes, 2 sets of 4 total 8.
Brass windshield frame
Rear brake lever at the hub. Have new cams, need the single rivet lever. I have 1 already.
Brake rod radius rod clip.
Battery cables.
Foot starter switch.
Gas tank for speedster.

User avatar

Topic author
ivaldes1
Posts: 913
Joined: Mon Jan 07, 2019 1:32 am
First Name: Ignacio
Last Name: Valdes
* REQUIRED* Type and Year of Model Ts owned: 1924 Touring
Location: Houston, Tx
MTFCA Number: 50406
Board Member Since: 2016

Re: Chassis parts for Hay Wagon to Speedster project wanted.

Post by ivaldes1 » Fri Jul 10, 2020 1:59 am

2nd largest front early tapered leaf spring.

Post Reply Previous topicNext topic