1926 Holley NH carburetor

Post parts wanted or for sale here
User avatar

Topic author
Corey Walker
Posts: 592
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
* REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
Location: Brownsboro, TX
MTFCA Number: 51502
Board Member Since: 2007

1926 Holley NH carburetor

Post by Corey Walker » Sat Jul 11, 2020 12:19 pm

New needle and seat, spray nozzle,drain assembly, choke spring,passages cleaned and sealed with set screws, tested float, test run. $165 postpaid to continental USA. Email: wlkma9@gmail.com
Attachments
638EA1D8-7C83-470A-8952-0304B9982E91.jpeg
C20952A3-73F9-492D-B635-56C96503150A.jpeg
Corey Walker, Brownsboro, Texas


tom_strickling
Posts: 388
Joined: Tue Jan 08, 2019 10:31 am
First Name: Tom
Last Name: Strickling
* REQUIRED* Type and Year of Model Ts owned: 11 Torpedo, 18 Touring, 21 TT Huckster, 24 snowmpbile Staude and Shaw tractor conversions, Model T powered sickel bar mower
Location: New Philadelphia Ohio

Re: 1926 Holley NH carburetor

Post by tom_strickling » Sat Jul 11, 2020 3:39 pm

Is it powder coated or painted? What kind if paint?

Thanks
“The trouble with retirement is that you never get a day off.” – Abe Lemons.

User avatar

Topic author
Corey Walker
Posts: 592
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
* REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
Location: Brownsboro, TX
MTFCA Number: 51502
Board Member Since: 2007

Re: 1926 Holley NH carburetor

Post by Corey Walker » Sat Jul 11, 2020 6:14 pm

It is painted with rustoleum.
Corey Walker, Brownsboro, Texas


Dallas Landers
Posts: 2786
Joined: Sun Jan 06, 2019 12:26 pm
First Name: Dallas
Last Name: Landers
* REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
Location: N.E. Indiana
MTFCA Number: 49995

Re: 1926 Holley NH carburetor

Post by Dallas Landers » Sat Jul 11, 2020 9:52 pm

Im running two carbs from Corey. They have both been in use for a couple years and havn't touched them since. My 26 RPU sat all week. I went out this morning pulled the throttle 1/3 open and pulled up on the crank one time and it was going. No priming, no choke. Very happy customer I am.

User avatar

Topic author
Corey Walker
Posts: 592
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
* REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
Location: Brownsboro, TX
MTFCA Number: 51502
Board Member Since: 2007

Re: 1926 Holley NH carburetor

Post by Corey Walker » Mon Jul 20, 2020 4:29 pm

Back to top.
Corey Walker, Brownsboro, Texas


ModelTWoods
Posts: 1049
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX
MTFCI Number: 20180

Re: 1926 Holley NH carburetor

Post by ModelTWoods » Mon Jul 20, 2020 5:24 pm

Corey, I know that you have listed rebuilt NH carbs, previously, and one you said, had a special float to be used with a cowl mounted tank, if I'm not mistaken. I would be using this carb on a four door sedan with an under front seat mounted tank. Will this carb work for this body style and tank? If so, I'm a buyer.

User avatar

Topic author
Corey Walker
Posts: 592
Joined: Sun Jan 06, 2019 11:46 am
First Name: Corey
Last Name: Walker
* REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
Location: Brownsboro, TX
MTFCA Number: 51502
Board Member Since: 2007

Re: 1926 Holley NH carburetor

Post by Corey Walker » Tue Jul 21, 2020 9:41 am

Carb is sold
Corey Walker, Brownsboro, Texas

Post Reply Previous topicNext topic