Needing rear quarter/wheel well patch panels for a 1926 Touring. Do they even possibly exist???
Thank you!
PATCH PANELS-Wanted
-
Topic author - Posts: 689
- Joined: Tue Jan 08, 2019 12:39 am
- First Name: Dan
- Last Name: S
- * REQUIRED* Type and Year of Model Ts owned: '23 and '26
- Location: Taxachusetts
- Board Member Since: 2015
PATCH PANELS-Wanted
________________
**FATE**
---------------------------
PM me if you have any Indian Motocycle parts!
**FATE**
---------------------------
PM me if you have any Indian Motocycle parts!
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: PATCH PANELS-Wanted
If you can make some cardboard templates I can bend you up some.
Hank
Hank
-
- Posts: 1122
- Joined: Mon Jan 07, 2019 6:51 pm
- First Name: Keith
- Last Name: Townsend
- * REQUIRED* Type and Year of Model Ts owned: late 1911 touring, 1915 runabout, 1919 touring, brass speedster
- Location: Gresham, Orygun
- MTFCA Number: 14778
- MTFCA Life Member: YES
- MTFCI Number: 16305
- Board Member Since: 1999
Re: PATCH PANELS-Wanted
Dan,
There is one on T-bay:
https://www.ebay.com/itm/Model-T-Ford-1 ... ondition=4
Not sure if it is better or not...
: ^ )
There is one on T-bay:
https://www.ebay.com/itm/Model-T-Ford-1 ... ondition=4
Not sure if it is better or not...
: ^ )
-
- Posts: 78
- Joined: Sun Jan 06, 2019 2:11 pm
- First Name: Ronald
- Last Name: Dupree
- Location: Illinois
- MTFCA Number: 22940
- MTFCI Number: 15830
Re: PATCH PANELS-Wanted
I made a complete set of rear quarters for a 1927 touring. If you don't have access to a brake to form the lower edge you may be unhappy with the fitup of the panels.
Ron Dupree
-
Topic author - Posts: 689
- Joined: Tue Jan 08, 2019 12:39 am
- First Name: Dan
- Last Name: S
- * REQUIRED* Type and Year of Model Ts owned: '23 and '26
- Location: Taxachusetts
- Board Member Since: 2015
Re: PATCH PANELS-Wanted
Thank you all.
As you can see in my pic's, the rear wheel wells are toast. The upside down u shaped channel frame behind the fiberglass cloth are pretty much done too. Otherwise the body is in pretty good shape. Im going to make up panels and use a friends sheet metal brake. Another buddy is the welder. We'll get it done.
As you can see in my pic's, the rear wheel wells are toast. The upside down u shaped channel frame behind the fiberglass cloth are pretty much done too. Otherwise the body is in pretty good shape. Im going to make up panels and use a friends sheet metal brake. Another buddy is the welder. We'll get it done.
________________
**FATE**
---------------------------
PM me if you have any Indian Motocycle parts!
**FATE**
---------------------------
PM me if you have any Indian Motocycle parts!