PATCH PANELS-Wanted

Post parts wanted or for sale here

Topic author
Professor Fate
Posts: 39
Joined: Tue Jan 08, 2019 12:39 am
First Name: Dan
Last Name: S.
Location: S.Deerfield MA
Board Member Since: 2015

PATCH PANELS-Wanted

Post by Professor Fate » Sun Jul 26, 2020 2:13 am

Needing rear quarter/wheel well patch panels for a 1926 Touring. Do they even possibly exist???
Thank you!
20200716_170750.jpg
Attachments
20200716_170738.jpg

User avatar

Henry K. Lee
Posts: 3167
Joined: Sun Jan 06, 2019 11:09 am
First Name: Henry
Last Name: Lee
Location: South Pittsburg, TN
MTFCA Number: 479
MTFCA Life Member: YES

Re: PATCH PANELS-Wanted

Post by Henry K. Lee » Sun Jul 26, 2020 6:23 am

If you can make some cardboard templates I can bend you up some.

Hank

User avatar

KWTownsend
Posts: 437
Joined: Mon Jan 07, 2019 6:51 pm
First Name: Keith
Last Name: Townsend
Location: Gresham, Orygun
MTFCA Number: 14778
MTFCA Life Member: YES
MTFCI Number: 16305
Board Member Since: 1999

Re: PATCH PANELS-Wanted

Post by KWTownsend » Sun Jul 26, 2020 12:20 pm

Dan,
There is one on T-bay:

https://www.ebay.com/itm/Model-T-Ford-1 ... ondition=4

Not sure if it is better or not...

: ^ )

User avatar

rondupree
Posts: 48
Joined: Sun Jan 06, 2019 2:11 pm
First Name: Ronald
Last Name: Dupree
Location: Illinois
MTFCA Number: 22940
MTFCI Number: 15830

Re: PATCH PANELS-Wanted

Post by rondupree » Mon Jul 27, 2020 8:27 am

I made a complete set of rear quarters for a 1927 touring. If you don't have access to a brake to form the lower edge you may be unhappy with the fitup of the panels.
Ron Dupree


Topic author
Professor Fate
Posts: 39
Joined: Tue Jan 08, 2019 12:39 am
First Name: Dan
Last Name: S.
Location: S.Deerfield MA
Board Member Since: 2015

Re: PATCH PANELS-Wanted

Post by Professor Fate » Mon Jul 27, 2020 10:22 pm

Thank you all.
As you can see in my pic's, the rear wheel wells are toast. The upside down u shaped channel frame behind the fiberglass cloth are pretty much done too. Otherwise the body is in pretty good shape. Im going to make up panels and use a friends sheet metal brake. Another buddy is the welder. We'll get it done.
20200721_190122.jpg
Attachments
20200524_163825.jpg
20200618_135339.jpg
20200716_170801.jpg

Post Reply Previous topicNext topic