Page 1 of 1

FS High Revving Model T Flywheel/Clutch System SOLD

Posted: Tue Jul 28, 2020 9:17 pm
by Henry K. Lee
Just finished this one up.., designed to be used with an aux transmission with reverse such as a Giant, Jumbo, Muncie, 37-39 Chevy top loader style or any other you wish to have. You still utilize the engine brake and your high low pedal becomes the clutch but totally wet. Has a Kevlar demountable brake band and a new large drum with Jack Rabbit clutches. Also has a machined tail shaft with a ball bearing forth main. The flywheel weighs in at just under 20 Lbs. No large bulking weighted mass moving around so you RPM's really go! if you are planning on a splash system, simply install paddles. Not designed for an internal magneto!

$1,000.00 plus shipping, but prefer pick up.

Email Only to the address provided.

IMG_4370.jpeg
IMG_4371.jpeg
IMG_4372.jpeg
IMG_2441.jpeg

All the Best,

Hank

Re: FS High Revving Model T Flywheel/Clutch System

Posted: Wed Jul 29, 2020 11:26 am
by henryford2
Great idea keeping the transmission brake.

Re: FS High Revving Model T Flywheel/Clutch System

Posted: Wed Jul 29, 2020 11:44 pm
by mountain muncher
Hank, I'll match that up with the Chevy transmission you did for me. I'll take it. Unfortunately, I will have to have you ship it.
Thanks

John Rehberg

Re: FS High Revving Model T Flywheel/Clutch System

Posted: Thu Jul 30, 2020 6:54 am
by Henry K. Lee
Sold to John, Thanks MTFCA!