Page 1 of 1
Wanted: set of Grant brand .030” rings for aluminum pistons
Posted: Wed Sep 09, 2020 7:10 pm
by Adam
Email me (don’t pm). Thanks!
Re: Wanted: set of Grant brand .030” rings for aluminum pistons
Posted: Thu Sep 10, 2020 1:58 pm
by Dan Hatch
Email sent. Dan
Re: Wanted: set of Grant brand .030” rings for aluminum pistons
Posted: Fri Sep 11, 2020 10:58 am
by Adam
I’m no longer in need of the rings. Thanks!
Dan, I just emailed back.
Re: Wanted: set of Grant brand .030” rings for aluminum pistons
Posted: Sat Sep 12, 2020 1:29 am
by Craig Leach
I think most aluminum pistons use 1955-1956 chevy 265 cu.in. rings so you can buy them by bore size ie. Std, 10-20-30-over from some suppliers. You do get enough for two engines when you buy a set
Re: Wanted: set of Grant brand .030” rings for aluminum pistons
Posted: Sat Sep 12, 2020 9:26 am
by George Hand
The top ring groves for an Aluminum Model T Piston are .125", for the 265 ci chevy they are 5/64", oil rings are both 3/16th"