Page 1 of 1
Stevens Front Axle Tooling FS
Posted: Sun Sep 20, 2020 10:41 am
by Dan Hatch
Just finished another batch of Stevens Front Axle Tooling. Sorry but there has been a price increase.
Upper Tapered Reamers. $210.00 each
Bottom Reamer/Tap. $160.00 each
Upper inserts $3.50 each
Lower Threaded Inserts $5.50 each
Email me at address in pictures. Thanks Dan
- 433E87C1-8B5D-4E57-AEF0-D971C84ABB77.jpeg (50.1 KiB) Viewed 6539 times
Re: Stevens Front Axle Tooling FS
Posted: Mon Sep 21, 2020 4:16 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Thu Sep 24, 2020 4:03 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Fri Sep 25, 2020 1:15 pm
by Jack Putnam, in Ohio
I have the Steven's Front Axle FRAME available to go with Dans tooling. The frame is $275 plus USPS. jputnam(at)wcoil.com
Re: Stevens Front Axle Tooling FS
Posted: Sat Sep 26, 2020 10:42 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sat Oct 03, 2020 10:47 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sat Oct 10, 2020 10:28 am
by Dan Hatch
This maybe last batch.
Re: Stevens Front Axle Tooling FS
Posted: Sun Oct 11, 2020 11:24 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Oct 12, 2020 1:51 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Oct 13, 2020 12:05 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Oct 14, 2020 9:49 am
by Pep C Strebeck
E-mail sent.
Re: Stevens Front Axle Tooling FS
Posted: Thu Oct 15, 2020 9:19 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sat Oct 17, 2020 9:53 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Oct 20, 2020 1:20 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Oct 21, 2020 1:16 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Thu Oct 22, 2020 10:58 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Oct 28, 2020 9:14 am
by Dan Hatch
Back to the top again
Re: Stevens Front Axle Tooling FS
Posted: Fri Oct 30, 2020 9:11 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Nov 02, 2020 9:24 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Nov 02, 2020 9:37 am
by perry kete
Dan,
I'm sending an e-mail to purchase additional inserts.
I have purchased your tooling as well as Jack's tooling frame and I must say that both of you have produced a quality product and I am very pleased.
Denny
Re: Stevens Front Axle Tooling FS
Posted: Mon Nov 02, 2020 6:35 pm
by perry kete
Dan,
I received your email and have followed your instructions so a letter is in the mail to you.
Denny
Re: Stevens Front Axle Tooling FS
Posted: Wed Nov 11, 2020 8:35 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sat Nov 14, 2020 1:36 pm
by perry kete
Dan,
I have received the package of inserts today and everything arrived in good condition. As always a quality product.
Denny
Re: Stevens Front Axle Tooling FS
Posted: Mon Nov 16, 2020 10:36 am
by Dan Hatch
Thanks Denny. Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Nov 17, 2020 12:32 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Nov 17, 2020 3:42 pm
by Dan Hatch
If anyone wants some tooling this batch is going fast. Better get it while you can. Thanks Dan
Re: Stevens Front Axle Tooling FS
Posted: Tue Nov 17, 2020 8:29 pm
by nsbrassnut
Hi Dan
PM sent.
Jeff
Nova Scotia
Re: Stevens Front Axle Tooling FS
Posted: Thu Nov 19, 2020 8:32 am
by Dan Hatch
As I said this batch of tooling is going fast. If you want any better get it now. Thanks Dan
Re: Stevens Front Axle Tooling FS
Posted: Fri Dec 04, 2020 9:12 am
by Dan Hatch
Only have 3 sets of Stevens Tooling left. If you want one better get it soon.
Re: Stevens Front Axle Tooling FS
Posted: Sat Jan 09, 2021 12:58 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Jan 11, 2021 8:52 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Jan 12, 2021 9:40 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Jan 13, 2021 9:56 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Fri Jan 15, 2021 5:09 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sun Jan 17, 2021 11:17 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sat Jan 23, 2021 3:04 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sun Jan 31, 2021 2:22 pm
by Dan Hatch
Only have a couple sets left.
Re: Stevens Front Axle Tooling FS
Posted: Tue Feb 02, 2021 3:46 pm
by Dan Hatch
One set left
Re: Stevens Front Axle Tooling FS
Posted: Wed Feb 03, 2021 9:44 am
by Dan Hatch
sold out of upper Tapered Reamers
still have some Reamer/Taps (lower)
looking into making some more Tapered reamers
Re: Stevens Front Axle Tooling FS
Posted: Thu Feb 04, 2021 9:37 am
by Dan Hatch
Making another batch of tapered reamers. Should be ready mid March. Dan
Re: Stevens Front Axle Tooling FS
Posted: Mon Mar 15, 2021 4:32 pm
by JacolbEdwards
Would like to purchase the reamer tap and was hoping if there is room left on the list for the the upper tapered reamer that I could be put on it
Re: Stevens Front Axle Tooling FS
Posted: Mon Mar 15, 2021 5:20 pm
by Dan Hatch
send me a email to address in pictures. Thanks, Dan
Re: Stevens Front Axle Tooling FS
Posted: Wed Mar 17, 2021 5:51 am
by tmagill
Hi Dan, are any tapered reamers available yet. Tim
Re: Stevens Front Axle Tooling FS
Posted: Wed Mar 17, 2021 5:54 am
by Dan Hatch
Yes they are