Hello everyone.
I’m in need of 4 rod caps, only, that measure at a minimum of .660, preferably .700 measure at the bolt holes, top to bottom. Most of the time these are filed and they are thinner that they are supposed be. Please let me know if you have any that meet these requirements and are willing to sell.
Thanks!
WTB ROD CAPS WITH MINIMUM MEASUREMNT OF .660
-
Brent Mize
Topic author - Posts: 219
- Joined: Sun Jan 06, 2019 12:36 pm
- First Name: Brent
- Last Name: Mize
- * REQUIRED* Type and Year of Model Ts owned: 1913 Runabout 1927 Sport Touring
- Location: Reynoldsburg, Oh
- MTFCA Number: 10000
-
Brent Mize
Topic author - Posts: 219
- Joined: Sun Jan 06, 2019 12:36 pm
- First Name: Brent
- Last Name: Mize
- * REQUIRED* Type and Year of Model Ts owned: 1913 Runabout 1927 Sport Touring
- Location: Reynoldsburg, Oh
- MTFCA Number: 10000
Re: WTB ROD CAPS WITH MINIMUM MEASUREMNT OF .660
Dennis Fleming took the time to find some caps.
Thank you Dennis and the MTFCA classifieds!
Thank you Dennis and the MTFCA classifieds!
-
George Hand
- Posts: 310
- Joined: Sun Jan 06, 2019 12:02 pm
- First Name: George
- Last Name: Hand
- * REQUIRED* Type and Year of Model Ts owned: 1912 open express, 1920 touring, 1926 tudor-lisenced and insured, 1921tt project 1922 fendered chassis, 192x tt dootle bug 192xengine w/winch projects
- Location: Preble NY
- MTFCA Number: 28114
- MTFCI Number: 21834
Re: WTB ROD CAPS WITH MINIMUM MEASUREMNT OF .660
Brent, .660-.770 that is good information to have, I have a set of caps still on the rods. The wrist pin end of the rods became rusty in storage so I bead blasted them, they were to become exchange cores but after cleaning they are very pitted at the pin end so I do not feel they would be received as cores. I will hang on to for now & have dug out a better set. Now on to measure. Thanks George