Stevens/Walden tool catalogs update ...please read Sunday Oct 18th post

Post parts wanted or for sale here
User avatar

Topic author
dobro1956
Posts: 603
Joined: Sun Jan 06, 2019 10:13 pm
First Name: Donnie
Last Name: Brown
Location: Hills of Arkansas

Stevens/Walden tool catalogs update ...please read Sunday Oct 18th post

Post by dobro1956 » Mon Oct 12, 2020 11:42 pm

Update, Please read Sunday, Oct 18th post

Everyone who was interested in a catalog, please check your e-mails. I have sent out e-mails to the first 25 folks that were interested in the catalogs. There were two more interested in catalogs than I have copies to send at this time. . After I get this run taken care of Ill be doing at least one more run of catalogs. Please bear with me, I'm old, slow, and walk with a limp. :) dmdeaton and Dan B you are the first two in line for the second run.... Ill order, and then post the second run for sale after I have all these mailed ... Its just too complicated for my feeble mind to handle more than 25 at a time .... :) Thanks again for the interest in my projects ....

Here is a link to the first post about the catalogs if you have forgotten by now what I had reprinted.


https://mtfca.com/phpBB3/viewtopic.php?t=15634
Last edited by dobro1956 on Sun Oct 18, 2020 11:29 am, edited 3 times in total.


FordFool
Posts: 97
Joined: Mon Jan 28, 2019 4:49 pm
First Name: Don
Last Name: Kirtley
Location: Devore, CA
MTFCA Number: 23703
MTFCI Number: 23153
Board Member Since: 2009

Re: Stevens/Walden tool catalogs update ...

Post by FordFool » Tue Oct 13, 2020 11:07 am

Donnie. Still interested. Keep me posted. Don


Lonnie Doan
Posts: 12
Joined: Tue Jan 08, 2019 11:05 pm
First Name: Lonnie
Last Name: Doan
Location: Southeast Illinois

Re: Stevens/Walden tool catalogs update ...

Post by Lonnie Doan » Tue Oct 13, 2020 11:38 am

I'd take one if any are left. No hurry. Thanks.


George Hand
Posts: 108
Joined: Sun Jan 06, 2019 12:02 pm
First Name: George
Last Name: Hand
Location: Preble NY
MTFCA Number: 28114
MTFCI Number: 21834

Re: Stevens/Walden tool catalogs update ...

Post by George Hand » Tue Oct 13, 2020 11:51 am

Donnie, I put check in the mail. Thanks George


FordFool
Posts: 97
Joined: Mon Jan 28, 2019 4:49 pm
First Name: Don
Last Name: Kirtley
Location: Devore, CA
MTFCA Number: 23703
MTFCI Number: 23153
Board Member Since: 2009

Re: Stevens/Walden tool catalogs update ...

Post by FordFool » Tue Oct 13, 2020 12:35 pm

Donnie I’ll get a check in the mail ASAP. Thanks. Don


Bill Anziani
Posts: 112
Joined: Sun Jan 06, 2019 2:42 pm
First Name: Bill
Last Name: Anziani
Location: Concord, NC

Re: Stevens/Walden tool catalogs update ...

Post by Bill Anziani » Tue Oct 13, 2020 12:58 pm

Sent payment this morning via pay pal

User avatar

Dan B
Posts: 182
Joined: Sun Jan 06, 2019 1:53 pm
First Name: Dan
Last Name: Blaydon
Location: PA

Re: Stevens/Walden tool catalogs update ...

Post by Dan B » Tue Oct 13, 2020 10:31 pm

dobro1956 wrote:
Mon Oct 12, 2020 11:42 pm
Everyone who was interested in a catalog, please check your e-mails. I have sent out e-mails to the first 25 folks that were interested in the catalogs. There were two more interested in catalogs than I have copies to send at this time. . After I get this run taken care of Ill be doing at least one more run of catalogs. Please bear with me, I'm old, slow, and walk with a limp. :) dmdeaton and Dan B you are the first two in line for the second run.... Ill order, and then post the second run for sale after I have all these mailed ... Its just too complicated for my feeble mind to handle more than 25 at a time .... :) Thanks again for the interest in my projects ....

Here is a link to the first post about the catalogs if you have forgotten by now what I had reprinted.


https://mtfca.com/phpBB3/viewtopic.php?t=15634
Sounds good Donnie, keep me posted. Thanks!!
1923 Touring


GG Gregory
Posts: 102
Joined: Sat Jul 20, 2019 3:05 pm
First Name: GG
Last Name: Gregory
Location: Maryville Tn

Re: Stevens/Walden tool catalogs update ...

Post by GG Gregory » Wed Oct 14, 2020 1:07 pm

I’d love a copy of your next run.


sweet23
Posts: 174
Joined: Sun Jan 06, 2019 1:19 pm
First Name: Darryl
Last Name: Bobzin
Location: Kannapolis,NC
MTFCA Number: 27211
Board Member Since: 2016

Re: Stevens/Walden tool catalogs update ...

Post by sweet23 » Sat Oct 17, 2020 3:25 pm

Received mine today. Very nice. Great job on them Donnie.


CDooREDW
Posts: 40
Joined: Thu Apr 23, 2020 12:55 pm
First Name: Ron
Last Name: Wenzel
Location: Huntsville, AL
MTFCA Number: 50735
Board Member Since: 2020

Re: Stevens/Walden tool catalogs update ...

Post by CDooREDW » Sat Oct 17, 2020 4:52 pm

Donnie, pls put me down for a copy of your next printing. No hurry, sir. Thank you, Ron


pre15dale
Posts: 80
Joined: Sun Jan 06, 2019 7:28 pm
First Name: Dale
Last Name: Kemmerer
Location: Medford, OR1909

Re: Stevens/Walden tool catalogs update ...

Post by pre15dale » Sat Oct 17, 2020 11:05 pm

Donnie, I was #21 or 22 on the original post. I have not receive an s mail. Please refresh my memory of the cost and where to send it. Dale


Fordnut
Posts: 6
Joined: Tue Jan 29, 2019 1:10 pm
First Name: Richard
Last Name: DeCarli
Location: Petaluma

Re: Stevens/Walden tool catalogs update ...

Post by Fordnut » Sun Oct 18, 2020 3:08 am

Donnie, I would love to be on the list for the next run. Richard

User avatar

Topic author
dobro1956
Posts: 603
Joined: Sun Jan 06, 2019 10:13 pm
First Name: Donnie
Last Name: Brown
Location: Hills of Arkansas

Re: Stevens/Walden tool catalogs update ...

Post by dobro1956 » Sun Oct 18, 2020 11:25 am

We went on a tour for the last few days. We wrecked the car when I lost control of car when Warford went into neutral. It rolled backward down a steep embankment and flipped over at the bottom. We are not hurt but I have been distracted for several days. Ill post about the wreck later. Please check your e-mails and spam folders. I sent e-mails out to everyone that was in the first 25 names. Ill start checking my list to see who has not responded. I have mailed 5 catalogs to the 5 people who paid with pay pal. I just received another pay pal payment for #6. I also have 5 contacts from folks mailing a check or money order. Just started receiving some of the checks, So Ill be mailing a few more catalogs Monday. So that leaves me with 14 folks I need to re-contact or maybe they will find the original e-mail. Please bear with me,
Thanks, Donnie Brown

Post Reply Previous topicNext topic