Post parts wanted or for sale here
- Posts: 1363
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- Location: Norwalk Ohio
I recently bought this nice magneto shelf from Ben J.( THANKS BENJI) I am going to make what will probably be a one-time run of these. Pretty neat setup, great to mount the magneto ( whatever brand you decide ) and allows use of generator in original spot. Neat speedster item. I’m going to offer just the three raw castings ( aluminum shelf, 2 brass lever arms) for $200ppd, or a machined and drilled casting, with the arms installed, ready to mount, ppd for $300. ******* PLEASE READ CAREFULLY.*******. I am going to leave the slots out of the shelf. It’ll be up to you to locate them. I can mark them if requested. The slots were for the original chain drive to allow tightened gas up the chain, but most likely these will be run with a cogged belt , also up to you to figure out. Art has a neat booklet that will be a help. I don’t need any money up front, and it’ll take me a couple months to turn them around. Probably ready for your Xmas $$$. When ready, I’ll notify you, but you can certainly change your mind and back out. No problem with that. I’ll wait a week to see if anyone is interested. Drop me a line, email@example.com , just that you might like one, kit or complete.
- Posts: 1185
- Joined: Sat Jan 12, 2019 12:11 pm
- First Name: Mark
- Last Name: Chaffin
- Location: Corona
- MTFCA Number: 31705
- Board Member Since: 2001
This would work great with a dual ignition set up. Run a distributor off the front and the mag on the side! Tim makes great products at a fair price. You have my endorsement my friend!