FS Exhaust Manifold Heater -

Post parts wanted or for sale here
User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

FS Exhaust Manifold Heater -

Post by TRDxB2 » Wed Sep 30, 2020 2:10 am

This manifold is in excellent condition. They appear for sale from time to time but never in this condition. My guess is that it was hardly used. No warping across the exhaust ports as can be seen in the photos. The threads are in great shape as well. The exhaust nut is not included but just used to show that it can thread completely. This manifold had a shroud around it when used as a heater. There is a plan for one on MTFCA a x275 - now $250 plus shipping PayPal preferred Will be sold to first committed buyer
IMG_1385.JPG
IMG_1386.JPG
level.jpg
threads.jpg
Attachments
email.jpg
email.jpg (2.94 KiB) Viewed 1097 times
Last edited by TRDxB2 on Tue Oct 13, 2020 9:58 pm, edited 2 times in total.

User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: FS Exhaust Manifold Heater - ARVIN?

Post by TRDxB2 » Sat Oct 03, 2020 8:01 pm

now $250 + shipping


Charles J
Posts: 231
Joined: Mon Jan 14, 2019 3:57 pm
First Name: Charles
Last Name: Jenkins
Location: Springfield OH
MTFCA Number: 28066
Board Member Since: 2017

Re: FS Exhaust Manifold Heater - ARVIN?

Post by Charles J » Mon Oct 05, 2020 4:14 pm

I would be interested if I could see it with rings and glands on a block I have one that a straight edge fits on but the back is still dropped and doesn't fit the block right

User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: FS Exhaust Manifold Heater - ARVIN?

Post by TRDxB2 » Mon Oct 05, 2020 5:04 pm

Charles J wrote:
Mon Oct 05, 2020 4:14 pm
I would be interested if I could see it with rings and glands on a block I have one that a straight edge fits on but the back is still dropped and doesn't fit the block right
I'll try to get some photos as you requested, likely tomorrow

User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: FS Exhaust Manifold Heater - ARVIN?

Post by TRDxB2 » Tue Oct 06, 2020 5:36 pm

Charles J wrote:
Mon Oct 05, 2020 4:14 pm
I would be interested if I could see it with rings and glands on a block I have one that a straight edge fits on but the back is still dropped and doesn't fit the block right
I hope these photos are what you were looking for. Gland rings used crushed copper rings to get the manifold close to the block and I snugged up the manifold bolts so the rings would still show. The manifold went one very easily and I had no help in putting it on. Really
Attachments
Gland 1.jpg
Glan rings.jpg


Charles J
Posts: 231
Joined: Mon Jan 14, 2019 3:57 pm
First Name: Charles
Last Name: Jenkins
Location: Springfield OH
MTFCA Number: 28066
Board Member Since: 2017

Re: FS Exhaust Manifold Heater - ARVIN?

Post by Charles J » Tue Oct 06, 2020 10:40 pm

Looks like it will fit up ok what's the bottom on it still need to find the important part charlie from Ohio

User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: FS Exhaust Manifold Heater - ARVIN?

Post by TRDxB2 » Wed Oct 07, 2020 10:05 am

Charles J wrote:
Tue Oct 06, 2020 10:40 pm
Looks like it will fit up ok what's the bottom on it still need to find the important part charlie from Ohio
It was attached, bolted, to the block its not resting on anything.
Attachments
IMG_1425[1].JPG
Last edited by TRDxB2 on Tue Oct 13, 2020 10:02 pm, edited 1 time in total.

User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: FS Exhaust Manifold Heater - ARVIN

Post by TRDxB2 » Wed Oct 07, 2020 4:42 pm

See this link for how to make the correct cover https://mtfca.com/phpBB3/viewtopic.php?f=2&t=16201

User avatar

Topic author
TRDxB2
Posts: 1276
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
Location: Moline IL
Board Member Since: 2018

Re: FS Exhaust Manifold Heater -

Post by TRDxB2 » Tue Oct 13, 2020 10:04 pm

Still available -goes to eBay this weekend

Post Reply Previous topicNext topic