Anybody have a decent ‘12-‘17 pan available?

Post parts for sale here

Topic author
Adam
Posts: 392
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Anybody have a decent ‘12-‘17 pan available?

Post by Adam » Sat Feb 23, 2019 11:19 am

I am looking for any good “taper nosed” ‘12-‘17 engine pan. I’m working on a ‘12. The existing original pan has “3 rivet” style arms and a “teacup” oil drain. Finding a very good “3 rivet” or “7 rivet” ‘12 pan would be ideal, HOWEVER, it isn’t going in a car that will be judged and we would be happy with a real nice ‘13-‘17 pan if we can get one fairly quick. Within driving distance of Milwaukee or Madison, WI would be ideal.

I do have one lined up for Chickasha, but prefer not to wait that long.

I will be at the 2/24/19 West Bend, WI Model A Club swap meet for a couple hours Sunday morning. Just mentioning this because I know quite a few T hobbyists attend this one... I won’t have a space “just visiting” (maybe 8-10). Thanks!

User avatar

rnwilliams
Posts: 52
Joined: Sun Jan 06, 2019 11:31 pm
First Name: Richard (Ricky)
Last Name: Williams
Location: Humboldt, TN
MTFCA Number: 28991
MTFCI Number: 23852
Contact:

Re: Anybody have a decent ‘12-‘17 pan available?

Post by rnwilliams » Sat Feb 23, 2019 2:59 pm

Adam, I have a really good 3 rivet pan and I am looking for a 7 rivet 1912 pan to replace it with. If you come across a 7 rivet pan I would love to swap and give you a little extra.
Richard Williams, Humboldt, TN
President, Tennessee T's inc.

User avatar

Oldav8tor
Posts: 364
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Juhl
Location: Thumb of Michigan
MTFCA Number: 50297
MTFCI Number: 24810

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Oldav8tor » Sat Feb 23, 2019 6:01 pm

I have a nice pan removed from my car, built in Sept 1916. I believe it is what is referred to as a 7 rivet. The day before I broke my ankle I sprayed Zinc chromate primer on the outside and coated the inside with WD 40, thinking I might sell it when I figured out what was a fair asking price. I've seen them sell for some pretty hefty prices but don't want to gouge anyone. I'm in the Thumb of Michigan, 45 minutes North of Port Huron (the bottom of Lake Huron) so not really in range of either of you.

Wish I had a better picture of it. The fellow who rebuilt my engine soda-blasted it in preparation for reinstallation before I decided to go another way, thus the need for Zinc chromate, etc. I do have a three-dip cover for it with brackets. Sorry I can't be more helpful.
Pan.jpg
1917 Touring
1952 Willys M38a1 Jeep

User avatar

RajoRacer
Posts: 829
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Anybody have a decent ‘12-‘17 pan available?

Post by RajoRacer » Sat Feb 23, 2019 6:52 pm

Tim - 7 rivet refers to the number of rivets that attach the c.c arms to the c.c.

User avatar

Oldav8tor
Posts: 364
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Juhl
Location: Thumb of Michigan
MTFCA Number: 50297
MTFCI Number: 24810

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Oldav8tor » Sat Feb 23, 2019 8:56 pm

Ahhhh! I learn something every day. When my buddy comes over next week I'll ask him to take a couple pix for me so I know exactly what I've got.
Thanks!
1917 Touring
1952 Willys M38a1 Jeep


Topic author
Adam
Posts: 392
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Adam » Sat Feb 23, 2019 9:17 pm

Hi Tim, I’m interested. Please email me with more details. I believe you have my email. Thanks! -Adam.


Jim, Sr.
Posts: 81
Joined: Sun Jan 06, 2019 11:13 pm
First Name: Jim, Sr.
Last Name: Rodell
Location: Wisconsin
MTFCA Number: 2406
MTFCI Number: 22213

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Jim, Sr. » Sat Feb 23, 2019 10:38 pm

Adam, can't the original pan be fixed?
1922 Coupe , 1926 Touring


Joe Bell
Posts: 147
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Joe Bell » Sun Feb 24, 2019 8:48 am

I have 8 narrow nose pans, you can come and take your pick, 100-150, there is one seven rivet but it needs some work, front rivets loose and the threads are stripped out on the tea cup.


Nv Bob
Posts: 194
Joined: Mon Jan 07, 2019 11:04 pm
First Name: Bob
Last Name: Middleton
Location: Western nv

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Nv Bob » Tue Feb 26, 2019 12:13 am

Adam or anyone else I have a 3 rivet pan
Oil but good shape if no interest I put it back in my 18 next winter


Topic author
Adam
Posts: 392
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Adam » Tue Feb 26, 2019 9:41 am

Bob and Joe, I would prefer to see a pan in person before I buy it. I’m in Southeastern Wisconsin. If you were going to Chickasha and could bring it along, we could meet up there. Thanks.


Joe Bell
Posts: 147
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Joe Bell » Tue Feb 26, 2019 1:46 pm

Sorry Adam, been there and was not worth the 1500 mile trip one way, there was stuff there that they where trying to sell that my scrap pile looked better. Will never go back!

User avatar

RajoRacer
Posts: 829
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Anybody have a decent ‘12-‘17 pan available?

Post by RajoRacer » Tue Feb 26, 2019 2:19 pm

I'm with you Joe - we drove from Washington State a few years ago - there was nothing there that I don't have in my shop & container !

User avatar

Mark Gregush
Posts: 1148
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
Location: Portland Or
Board Member Since: 1999

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Mark Gregush » Tue Feb 26, 2019 9:33 pm

Not to take any sales away, but what is wrong with your pan?
I know the voices aren't real but damn they have some good ideas! :roll:

1921 Huckster
1925 Cut down pickup


Nv Bob
Posts: 194
Joined: Mon Jan 07, 2019 11:04 pm
First Name: Bob
Last Name: Middleton
Location: Western nv

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Nv Bob » Tue Feb 26, 2019 9:50 pm

To far but you find a ride i send it that way
If unhappy just arrange a ride back


Topic author
Adam
Posts: 392
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Adam » Wed Feb 27, 2019 9:53 am

Mark, The original pan has old large weld repairs to the nose, 1 arm, and corners. The inside corners have cracks that extend a few inches into the sump that have been previously welded, cracked again, brazed, and cracked again. The inside of the pan at the arms have similar repairs. Plus, there is a long “wrinkle” in the pan that was maybe a stamping error that could be a source for future trouble. I can properly repair the existing pan, but proper repair isn’t cost effective.

User avatar

Mark Gregush
Posts: 1148
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
Location: Portland Or
Board Member Since: 1999

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Mark Gregush » Wed Feb 27, 2019 10:51 am

Yikes! I asked because others may be wondering also. Keep your eyes on Ebay also, I did see you want to check it out first, but sometimes it doesn't work out that way and you may have to rely on photos and description.
I know the voices aren't real but damn they have some good ideas! :roll:

1921 Huckster
1925 Cut down pickup


Joe Bell
Posts: 147
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Joe Bell » Wed Feb 27, 2019 8:48 pm

Mike Bird, I did not get an email address with your message. Joe

User avatar

Tbird
Posts: 123
Joined: Sun Jan 06, 2019 6:51 pm
First Name: Mike
Last Name: Bird
Location: Goshen IN

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Tbird » Thu Feb 28, 2019 7:43 am

Joe,
I resent the message with my email
Thanks Mike Bird


rodelljunior
Posts: 18
Joined: Thu Jan 17, 2019 6:55 pm
First Name: James
Last Name: Rodell
Location: Kewaskum
MTFCA Number: 14035
MTFCI Number: 13594

Re: Anybody have a decent ‘12-‘17 pan available?

Post by rodelljunior » Thu Feb 28, 2019 9:42 pm

What is the value of a good 13-17 pan?


Joe Bell
Posts: 147
Joined: Thu Feb 21, 2019 1:20 pm
First Name: Joe
Last Name: Bell
Location: Tiffin Ohio
MTFCI Number: 24066

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Joe Bell » Thu Feb 28, 2019 9:47 pm

15-17 100-150 11-12 pan 500-1200


Original Smith
Posts: 875
Joined: Tue Jan 08, 2019 10:43 am
First Name: Larry
Last Name: Smith
Location: Lomita, California
MTFCA Number: 121
MTFCA Life Member: YES
MTFCI Number: 16310

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Original Smith » Fri Mar 01, 2019 10:14 am

There are three different style pans used in 1913! It's good to know what you are looking for!


Topic author
Adam
Posts: 392
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Re: Anybody have a decent ‘12-‘17 pan available?

Post by Adam » Fri Mar 01, 2019 10:29 am

Smith, The original post and my follow-up states exactly what I’m looking for.

Post Reply Previous topicNext topic