FS Brass sediment bowl
-
Topic author - Posts: 143
- Joined: Tue Jan 08, 2019 7:01 pm
- First Name: Steve
- Last Name: Grisbee
- * REQUIRED* Type and Year of Model Ts owned: 0
- Location: Cheyenne
FS Brass sediment bowl
It is slightly squeezed and a bit chewed up but threads are good and no visable cracks. There is a ring of solder on the valve,probably from a piece of copper tubing had been soldered there. Whether the valve holds is unknown. Will need a gasket and some screen. The inlet is 1/4" pipe thread,the outlet is something between 1/4 and 1/8th,maybe a compression nut went on it. $35 shipping included,check or paypal. Please email to the address in last picture if interested. Merry Christmas T-totalers.