1913 Holley S carburetor
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
1913 Holley S carburetor
New float, spray needle, bushing installed for throttle shaft, test run. $350 postpaid to continental USA. Email: wlkma9@gmail.com
Corey Walker, Brownsboro, Texas
-
- Posts: 151
- Joined: Sat Jan 19, 2019 7:44 pm
- First Name: Bill
- Last Name: Elliott
- Location: Michigan
- MTFCI Number: 22121
- Board Member Since: 2006
Re: 1913 Holley S carburetor
Corey, I'm interested in the carb and sent you an email. Thanks!
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
-
- Posts: 18
- Joined: Sat Jan 19, 2019 8:13 am
- First Name: John
- Last Name: Wofford
- Location: Florida
- MTFCA Number: 50361
Re: 1913 Holley S carburetor
Does the bowl leak? Crack at top doesn’t look to good.
-
Topic author - Posts: 280
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- Location: Brownsboro, TX
Re: 1913 Holley S carburetor
John, carburetor is sold, I got an email yesterday but it went to spam and just realized it today. Sorry about that. I had silver soldered that crack from the inside and a little bled through i suppose. I’ve got another if you’re interested. I’ve ran it off and on for a couple months.
Corey Walker, Brownsboro, Texas