FOUND! - Rayfield intake manifold for L2P, L2C, etc.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
FOUND! - Rayfield intake manifold for L2P, L2C, etc.
This manifold has an offset to push the carb out toward the frame, and has a built-in bell-crank to operate the throttle.
Thank you for looking, and please send me an email if you think you can help.
Thank you for looking, and please send me an email if you think you can help.
Last edited by Scott_Conger on Sun Feb 21, 2021 6:06 pm, edited 1 time in total.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
I know one is out there
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 979
- Joined: Mon Jan 07, 2019 5:42 pm
- First Name: Stan
- Last Name: Howe
- * REQUIRED* Type and Year of Model Ts owned: 2
- Location: Helena, MT
- MTFCA Number: 19133
- Board Member Since: 1999
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
I have one but it has the carburetor with it. Won't separate but the unit is for sale.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Thanks Stan
I was pretty sure you had one, and was pretty sure it had a carb on it! Unfortunately, not in the market for a third one...just the manifold.
Stay warm...it is -8 here but at least has stopped snowing.
I was pretty sure you had one, and was pretty sure it had a carb on it! Unfortunately, not in the market for a third one...just the manifold.
Stay warm...it is -8 here but at least has stopped snowing.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Scott, can you post a pic. I may have one.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Sure Donnie
Just got permission from Stan Howe to use one of his pictures.
The intake swoops "out" sort of like an early "T" dogleg and has a built-in belcrank to actuate the throttle linkage. It also has a "slot" instead of a hole in the forward mounting position, since the bel-crank boss impeeds the instalation of a long enough bolt through just a hole (the slot is not a post-purchase modification...it is original). A picture of one of Stan's set ups is this: Thank you Stan.
Just got permission from Stan Howe to use one of his pictures.
The intake swoops "out" sort of like an early "T" dogleg and has a built-in belcrank to actuate the throttle linkage. It also has a "slot" instead of a hole in the forward mounting position, since the bel-crank boss impeeds the instalation of a long enough bolt through just a hole (the slot is not a post-purchase modification...it is original). A picture of one of Stan's set ups is this: Thank you Stan.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Scott, my manifold is similar. It is dog legged like the one you show. But mine has a hole on both sides and a "stop" for something, where the bell crank is in Stan's photo. I think it was designed for a "choke or throttle" plate ??? . Ill try to remember to post a photo of it tomorrow. I think it could be made to work by installing something for a bell crank mount. It is solid brass and would look good with a brass carb.
-
- Posts: 1287
- Joined: Sun Jan 06, 2019 10:13 pm
- First Name: Donnie
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1927 Sport Touring, 1919 Speedster, 1914 Speedster, Wards tractor conversion, non starter 1926 Improved Touring
- Location: Hills of Arkansas
- MTFCA Number: 49575
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Scott Here are some pictures of my manifold. Even if you are not interested, maybe someone can tell me what it fit and why a possible throttle/choke plate ??? where it is located.
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Donnie
now THAT is neat! What a lovely bit of casting that is!
purely speculation but I wonder if there was an apparatus which would reduce the cross section such that velocity would be increased to maintain vaporization of fuel while engine was cold, which would be opened fully when at normal temperature (??)
Your efforts and interest are greatly appreciated, but it's not something I could forsee using...though I AM looking forward to finding out what this thing is, as you are too. Who knows, I may be passing on some fabulous bit of racing history, but that has been the story of my life! My heart says "buy it", but my wallet says "you can't afford it". HAHA!
now THAT is neat! What a lovely bit of casting that is!
purely speculation but I wonder if there was an apparatus which would reduce the cross section such that velocity would be increased to maintain vaporization of fuel while engine was cold, which would be opened fully when at normal temperature (??)
Your efforts and interest are greatly appreciated, but it's not something I could forsee using...though I AM looking forward to finding out what this thing is, as you are too. Who knows, I may be passing on some fabulous bit of racing history, but that has been the story of my life! My heart says "buy it", but my wallet says "you can't afford it". HAHA!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: WTB - Rayfield intake manifold for L2P, L2C, etc.
Back to the top
I know it is out there
I know it is out there
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: FOUND! - Rayfield intake manifold for L2P, L2C, etc.
Classified Ads Work
thank you Hank and Jeff!
thank you Hank and Jeff!
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: FOUND! - Rayfield intake manifold for L2P, L2C, etc.
Anytime here Guys!
-
- Posts: 120
- Joined: Sun Jan 06, 2019 8:35 pm
- First Name: Peter
- Last Name: McIntyre
- * REQUIRED* Type and Year of Model Ts owned: 1913 Speedster
- Location: Aylmer,Ontario
Re: FOUND! - Rayfield intake manifold for L2P, L2C, etc.
Intake for a Stromberg carb that does not have a throttle plate. Cheers pete
-
- Posts: 120
- Joined: Sun Jan 06, 2019 8:35 pm
- First Name: Peter
- Last Name: McIntyre
- * REQUIRED* Type and Year of Model Ts owned: 1913 Speedster
- Location: Aylmer,Ontario
-
- Posts: 443
- Joined: Mon Jan 07, 2019 10:37 am
- First Name: Dan
- Last Name: Haynes
- * REQUIRED* Type and Year of Model Ts owned: several
- Location: Lodi, CA
Re: FOUND! - Rayfield intake manifold for L2P, L2C, etc.
Donnie's brass manifold is part of a governor when a T engine is used as a power plant. I have the flyball part that goes in the generator hole.
You would open the throttle on the carburetor at a redline setting. The governor, controlling the manifold throttle plate, kept the RPMs in line, opening as needed but returning to reasonable revs when unloaded.
You would open the throttle on the carburetor at a redline setting. The governor, controlling the manifold throttle plate, kept the RPMs in line, opening as needed but returning to reasonable revs when unloaded.
"The further a society drifts from truth, the more it will hate those who speak it." -George Orwell
-
Topic author - Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: FOUND! - Rayfield intake manifold for L2P, L2C, etc.
Now, that makes perfect sense and should have been obvious from the start.
thank you Dan.
thank you Dan.
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured