WTB 26 Carburetor adjustment rod
-
Topic author - Posts: 421
- Joined: Mon Jan 21, 2019 4:45 pm
- First Name: Mark
- Last Name: Gember
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring 1926 Runabout 1926 Coupe
- Location: Athens AL
- MTFCA Number: 32303
- MTFCI Number: 16589
- Board Member Since: 2017
WTB 26 Carburetor adjustment rod
WTB – Carburetor adjustment rod for 26 Coupe. Must have good to excellent aluminum knob. Measures approximately 27” bottom of knob to end of rod OR 27 5/8” full length. Two-five-six-4-4-4-one-4-six-3 or email me markpaulagember and that’s at aol.com
-
Topic author - Posts: 421
- Joined: Mon Jan 21, 2019 4:45 pm
- First Name: Mark
- Last Name: Gember
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring 1926 Runabout 1926 Coupe
- Location: Athens AL
- MTFCA Number: 32303
- MTFCI Number: 16589
- Board Member Since: 2017
Re: WTB 26 Carburetor adjustment rod
to the top
-
- Posts: 1049
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: WTB 26 Carburetor adjustment rod
Mark, According to the Ford Price List of Parts, published in 1934, your 26 coupe should use T-4129-F which is 27 13/16" long. I have several 26-27 rods and would have to check their lengths. The knobs on all are in good condition, but will need polishing. I can't guaranty any of them are correct for your car until i check and since they are 140 miles away from me, it may be a month before I can do so. I know none were the correct length for my 27 coupe so I bought a repro that has a long rod you cut to proper length and then reattach the knob.
-
Topic author - Posts: 421
- Joined: Mon Jan 21, 2019 4:45 pm
- First Name: Mark
- Last Name: Gember
- * REQUIRED* Type and Year of Model Ts owned: 1922 Touring 1926 Runabout 1926 Coupe
- Location: Athens AL
- MTFCA Number: 32303
- MTFCI Number: 16589
- Board Member Since: 2017
Re: WTB 26 Carburetor adjustment rod
That sounds correct for overall length. A little long would not hurt. If you have one when you look I would sure like to have it. Sent you and email.
-
- Posts: 1049
- Joined: Tue Jan 08, 2019 10:53 am
- First Name: Terry
- Last Name: Woods
- * REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
- Location: Cibolo (San Antonio), TX
- MTFCI Number: 20180
Re: WTB 26 Carburetor adjustment rod
Mark. I'll look at them and measure them, the next trip I make. I'll probably bring them back with me to sell, as I have no use for them.
-
- Posts: 1250
- Joined: Thu Sep 03, 2020 9:43 am
- First Name: Mike
- Last Name: Leonard
- * REQUIRED* Type and Year of Model Ts owned: 6
- Location: Mt.vernon in.
Re: WTB 26 Carburetor adjustment rod
Lang's have them. Come 32" long. Part# 4129B
-
- Posts: 1650
- Joined: Sat Jan 19, 2019 9:28 am
- First Name: ROBERT
- Last Name: BERGSTADT
- Location: LOVES PARK IL
- MTFCA Number: 1575
Re: WTB 26 Carburetor adjustment rod
We make the rods, Bob