Page 1 of 1
Stevens Front Axle Tooling FS HEADS UP
Posted: Fri Jun 04, 2021 9:59 am
by Dan Hatch
New batch of Stevens Tooling done. I now have in stock Top Reamers, Lower Reamer/Tap, Upper inserts and Lower inserts.
Upper Tapered Reamer. $210.00 each
Lower Reamer/Tap. $195.00 each
Upper Tapered inserts $3.75 each
Lower Threaded inserts $5.75 each
All are + shipping
Email me at address in pictures Thanks Dan
- 4E1CEE26-1F18-416E-AC60-3456F2292F19.jpeg (34.02 KiB) Viewed 6810 times
ONLY HAVE 4 SETS of TOOLING left
This may be last batch I make, if you want a set better order them. Thanks Dan.
Re: Stevens Front Axle Tooling FS
Posted: Sun Jun 06, 2021 7:51 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Jun 07, 2021 9:35 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Jun 09, 2021 3:55 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Thu Jun 17, 2021 4:54 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Jun 22, 2021 5:05 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Thu Jun 24, 2021 10:56 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Jul 05, 2021 12:39 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sun Jul 11, 2021 4:49 pm
by Dan Hatch
Back to the top. This may well be my last batch, so if you think you need some better get them while I have them. Dan
Re: Stevens Front Axle Tooling FS
Posted: Mon Jul 12, 2021 11:13 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Jul 13, 2021 8:46 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Jul 14, 2021 9:47 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Thu Jul 15, 2021 5:04 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Jul 20, 2021 6:57 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Wed Jul 21, 2021 12:42 pm
by Dan Hatch
Back to the w
Re: Stevens Front Axle Tooling FS
Posted: Sun Jul 25, 2021 5:27 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Tue Jul 27, 2021 5:41 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Fri Jul 30, 2021 4:50 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Mon Aug 02, 2021 11:04 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Sun Aug 15, 2021 1:57 pm
by Dan Hatch
Few sets left
Re: Stevens Front Axle Tooling FS
Posted: Mon Sep 06, 2021 2:13 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS
Posted: Fri Sep 10, 2021 9:38 pm
by Dave Young
Dan. Exactly what are these inserts for? Axles that that the spindle bolt threads are shot?
Re: Stevens Front Axle Tooling FS
Posted: Sat Sep 11, 2021 4:18 am
by Dan Hatch
These are the consumables for this.
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Sun Sep 12, 2021 9:59 am
by Dan Hatch
See first post for HEADS UP.
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Wed Sep 15, 2021 5:56 pm
by mel.k53
I would like a reamer tap .Call me at 757-469-9420. MEL
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Thu Sep 16, 2021 5:16 pm
by Dan Hatch
Only 3 sets left. Like I said if you want a set better order. This may be last batch. Thanks Dan
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Sat Sep 18, 2021 2:29 pm
by Dan Hatch
Only 3 sets remain
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Thu Sep 23, 2021 5:52 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Tue Sep 28, 2021 8:56 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Mon Oct 11, 2021 5:38 pm
by Dan Hatch
Still have a few sets of tooling.
Plenty of inserts.
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Wed Oct 20, 2021 7:24 am
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Wed Oct 20, 2021 8:27 pm
by Dan Hatch
Back to the top
Re: Stevens Front Axle Tooling FS HEADS UP
Posted: Mon Oct 25, 2021 2:43 pm
by Dan Hatch
Back to the top