Post parts wanted or for sale here
- Posts: 213
- Joined: Mon Jan 07, 2019 12:44 am
- First Name: Bob
- Last Name: Shirley
- Location: Atlanta Tx
- MTFCA Number: 29135
It’s a easy project, 1 inch cold roll and 3/4 conduit. You’ll have to slit the conduit close it and tig or mig the joint, using the stock to keep the weld flat on the inside, not as difficult as one would think. Heat the stock for sharp bends after you do a little lathe work. Bob @ 903-eight 24-1949 if I can help.