WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
-
Topic author - Posts: 170
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Texas!
WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
well, what I really need is a useable A crank converted T engine (long block) year not important...lets make a deal...or Looking for a complete runnable Model N ~ 1 3/4" or so or $1,200 for the pair.
Last edited by blauvelt on Thu Aug 05, 2021 7:50 pm, edited 3 times in total.
-
- Posts: 1361
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
As I recall... the model “N” carbs were only produced in 2”+ barrel sizes...
I will dig up my catalog to confirm
I will dig up my catalog to confirm
-
- Posts: 1361
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Correction... looks like it was 1-3/4”, 1-7/8”, and 2”
-
Topic author - Posts: 170
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Texas!
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Thank you for the information Kevin, did not know that!
-
- Posts: 50
- Joined: Mon Jan 14, 2019 1:53 am
- First Name: Mike
- Last Name: Penserini
- * REQUIRED* Type and Year of Model Ts owned: 27 roadster pickup, brass speedster, Mercury # 253 B, Mercury # 1070, Faultless "Hoosier" parts collection.
- Location: Sacramento
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
The Model N can be sleeved down, here is an early (not for sale) 2 inch N sleeved down to 1 1/2 inch.
-
- Posts: 5339
- Joined: Sun Jan 06, 2019 11:09 am
- First Name: Henry
- Last Name: Lee
- * REQUIRED* Type and Year of Model Ts owned: Many
- Location: South Pittsburg, TN
- MTFCA Number: 479
- MTFCA Life Member: YES
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Have a complete short block "Stoker" Skat Crank ready for assembly. Cross drilled, A rods, correct pistons and rings, flat top, (T bore to A rods). $5,000.00 you pick up and assemble at your leisure.
All the Best,
Hank
All the Best,
Hank
-
- Posts: 1361
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Hey there Mike, thanks for showing that model N. What’s the story on the reducing sleeve...? Was it done to repair a broken throttle housing...?
Oh yeah, nice lookin velocity stack
Oh yeah, nice lookin velocity stack
-
Topic author - Posts: 170
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Texas!
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Thank you Hank, that is exactly what I am doing to myself right now with my current build. Hoping that someone has a long block and some other bits they finished 40 or 50 years back sitting in a corner, and a pair of 5H's are just what would make their collection a bit more complete and I can get a jump.
Henry K. Lee wrote: ↑Sun Aug 01, 2021 6:45 pmHave a complete short block "Stoker" Skat Crank ready for assembly. Cross drilled, A rods, correct pistons and rings, flat top, (T bore to A rods). $5,000.00 you pick up and assemble at your leisure.
All the Best,
Hank
-
- Posts: 86
- Joined: Wed May 19, 2021 10:37 pm
- First Name: Jack
- Last Name: Tarlinton
- * REQUIRED* Type and Year of Model Ts owned: 1927 Cut off
- Location: Sydney, NSW
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
If your trade is unsuccessful, I'm interested in buying one 5-H. Are either of yours operable?
Best regards
Jack
Best regards
Jack
-
Topic author - Posts: 170
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Texas!
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Good day Jack, hadn't planned on breaking up a pair, H's are rare as Winfield's go, and good pair is even more so.
Yes, these are in nice shape, barrels are tight with limited play, have all the little fiddly brass parts that are always beat up or gone, even have the float bowl caps.
Yes, these are in nice shape, barrels are tight with limited play, have all the little fiddly brass parts that are always beat up or gone, even have the float bowl caps.
Jack Tarlinton wrote: ↑Sun Aug 01, 2021 10:43 pmIf your trade is unsuccessful, I'm interested in buying one 5-H. Are either of yours operable?
Best regards
Jack
-
- Posts: 86
- Joined: Wed May 19, 2021 10:37 pm
- First Name: Jack
- Last Name: Tarlinton
- * REQUIRED* Type and Year of Model Ts owned: 1927 Cut off
- Location: Sydney, NSW
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Well, if you do end up stuck with the pair and get tempted to let one of them go, please let me know!
Thanks Douglas
Thanks Douglas
blauvelt wrote: ↑Tue Aug 03, 2021 10:52 amGood day Jack, hadn't planned on breaking up a pair, H's are rare as Winfield's go, and good pair is even more so.
Yes, these are in nice shape, barrels are tight with limited play, have all the little fiddly brass parts that are always beat up or gone, even have the float bowl caps.
Jack Tarlinton wrote: ↑Sun Aug 01, 2021 10:43 pmIf your trade is unsuccessful, I'm interested in buying one 5-H. Are either of yours operable?
Best regards
Jack
-
Topic author - Posts: 170
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Texas!
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Bumpity bump bump.
-
Topic author - Posts: 170
- Joined: Thu Jan 17, 2019 3:26 pm
- First Name: Douglas
- Last Name: Ogden
- Location: Texas!
Re: WTT - Pair of 1 3/8ths Winfield Model 5H carbs for...
Have a home for one, 600.00 for the other.