MTFCA Forum

***For Sale: Steven"s Front Axle repair tool Frame. Reproduced in cast iron, as the original. It is used to repair the worn king pin holes in the front axle of the Model T. This is the frame only as you will need the reamers and inserts available elsewhere.
$275 plus $16 shipping in the USA. I will accept a check or PayPal friends at jputnam(at)wcoil(dot)com . Available now, I have few in stock and this may be the last batch. USA made in Ohio. Contact 419-three zero 6-three nine 66. Thanks for your support.

If you really want to fix the front axle, you will need this tool.

Back to the top

Hello, could you let me know if this item is still available for sale.
Regards
Neil Dobson

only two remain in stock.

Are these tools still available ?
Thanks
Regards
Steve

Presently the Steven's front axle tool is out of stock. If I find there is sufficient interest I can do another run of them. JP 4/7/23

I would be interested ...
Would the price be about the same $275 ?
Please let me know if you do another run of this tool ..
Regards
Steve

I'd be interested, as well, at $275.
-David

Jack looking prices of the hub threading tool , maybe you should think about another run of them!

Add me to the list Jack!!

I would like one as well if you still have one

Scott

Jack, looks like there is demand!

Now, hopefully, foundry prices haven't been jacked up too badly!

May have to give this project some serious thought.

I already have one of Jack's Stevens tool frame. Along with Dan hatch's cutters and reamer it's just the thing for front axles. I'm confused if the interest is in the frame or the thread chaser. If the latter, I'd like on that list too.

SteveD;
The cutters and reamer you talk about, are those the ones that work with the Steven's tool frame ?
Regards
SteveW

Stevew wrote: ↑

Sun Apr 09, 2023 9:14 pm

SteveD;
The cutters and reamer you talk about, are those the ones that work with the Steven's tool frame ?
Regards
SteveW

YES!

Like Tim said

Thanks Tim and Steve for the information ...
Regards
Steve

Add me to the list of people interested in one if you make another batch. Thx greg@dekeyzerlaw.com

Add me to the list.
Mark Eyre

Putting my name back on the list due to my original account being deleted

Scott

I'd like to be added to the list if they become available again..
Peter

Hi Jack, yes....please put me down as interested in your Steven's Tool. Let me know when You may have another" run" .
Thank You

Steve Meudt

I would also like to be on the list. Thanks,
Scott

would take one also thank you, Scott

A new batch is in the process now.. August 1st, just waiting on the foundry. Jack.

Who makes the reamers for this tool?

Dan Hatch.

I do, thinking about another run. Will find out cost and post in another thread. Dan

Jack
I would like to get one of your Stevens front axle tool frames .

Paul Carreras

Hi Jack, I'm checking in to see when You may another Steven's frame tool available again.
Thanks
Steve Meudt

Steve and others: I am awaiting frame castings from the foundry. Once they are received I will have frames available. I do not have a delivery date from the foundry. They run on railroad time.