I have decided to part with my duplicate custom cast intake manifold. This manifold was specifically designed to fit my Akron-Hed overhead valve cylinder head, and is cast from 356-T6 aluminum. Manifold is machined to accept a pair of Winfield S or SR size B carburetors. Head flanges are 9.438” on center, 1.500” port diameter, and 2.750” bolt centers. I had 2 manifolds cast using a 3D printed sand mold, and so no pattern exists for future pours. These are probably the only 2 manifolds that will ever be produced. Sale price is about 30% of my investment (not including my time to design and machine)
Here is a link to the forum thread discussing the design, interchangeably, and more pics
viewtopic.php?f=2&t=22568&p=185896#p185896
Manifold for sale is as cast, with head and carb flanges machined. $800 plus shipping
Speedster intake manifold
-
Topic author - Posts: 1355
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
-
Topic author - Posts: 1355
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
Re: Speedster intake manifold
With a bit of elbow grease it could look like this...
-
Topic author - Posts: 1355
- Joined: Thu Jan 10, 2019 3:54 pm
- First Name: Kevin
- Last Name: Pharis
- Location: Sacramento CA
Re: Speedster intake manifold
Manifold is sold!