Found Wanted to buy radius rod ball socket for 4 dip pan Found
-
Topic author - Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Found Wanted to buy radius rod ball socket for 4 dip pan Found
Found
Ok so I am going to try and straighten my 4 dip pan where the ball socket mounts. The one that is now mounted is just too bent up to mess with, along with the socket being too worn. At some time the car was hit or damaged, pushing/bending it out of shape.
I am in need of a "GOOD" socket, preferably not too worn in the ball socket. I need one that I can work from/with to get the shape close and then be able to rivet/braze back on.
Thanks
Ok so I am going to try and straighten my 4 dip pan where the ball socket mounts. The one that is now mounted is just too bent up to mess with, along with the socket being too worn. At some time the car was hit or damaged, pushing/bending it out of shape.
I am in need of a "GOOD" socket, preferably not too worn in the ball socket. I need one that I can work from/with to get the shape close and then be able to rivet/braze back on.
Thanks
Last edited by Mark Gregush on Mon Jun 27, 2022 7:59 pm, edited 1 time in total.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 484
- Joined: Sun Jan 06, 2019 1:19 pm
- First Name: Darryl
- Last Name: Bobzin
- * REQUIRED* Type and Year of Model Ts owned: 2, '25 T Runabouts, '14 Touring
- Location: Kannapolis,NC
- MTFCA Number: 27211
- Board Member Since: 2016
Re: Wanted to buy radius rod ball socket for 4 dip pan
Langs had some NOS ones at one time.
-
- Posts: 3907
- Joined: Sun Jan 06, 2019 8:00 pm
- First Name: John
- Last Name: Kuehn
- * REQUIRED* Type and Year of Model Ts owned: 19 Roadster, 21 Touring, 24 Coupe
- Location: Texas
- MTFCA Number: 28924
Re: Wanted to buy radius rod ball socket for 4 dip pan
Call Lang’s they may have one. I called them and they had some NOS tie rod parts. Mr Lang went back to look in the various boxes of NOS parts. I was glad to get them.
-
Topic author - Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Wanted to buy radius rod ball socket for 4 dip pan
Thanks for the lead. I will check tomorrow.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
Topic author - Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Wanted to buy radius rod ball socket for 4 dip pan
No luck with Lang's, so back to the top.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 542
- Joined: Sun Jan 06, 2019 12:27 pm
- First Name: BOB
- Last Name: CASCISA
- * REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
- Location: POULSBO, WA
- MTFCA Number: 16897
- MTFCI Number: 16628
Re: Wanted to buy radius rod ball socket for 4 dip pan
Will this work.
Looks like NOS.
Looks like NOS.
Respectfully Submitted,
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
-
- Posts: 542
- Joined: Sun Jan 06, 2019 12:27 pm
- First Name: BOB
- Last Name: CASCISA
- * REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
- Location: POULSBO, WA
- MTFCA Number: 16897
- MTFCI Number: 16628
Re: Wanted to buy radius rod ball socket for 4 dip pan
I also have this 2nd one
Respectfully Submitted,
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
-
- Posts: 427
- Joined: Mon Jan 21, 2019 4:14 pm
- First Name: Ken
- Last Name: Buhler
- * REQUIRED* Type and Year of Model Ts owned: 1927 Roadster 1927 Coupe
- Location: Kelowna B.C.
- MTFCA Number: 49471
- Board Member Since: 2012
Re: Wanted to buy radius rod ball socket for 4 dip pan
Bob, I don't jump ahead of anyone. I will take #1 if Mark doesn't.
Ken
Ken
Work honestly
Stay true to your word
Get the job done right
Stay true to your word
Get the job done right
-
- Posts: 542
- Joined: Sun Jan 06, 2019 12:27 pm
- First Name: BOB
- Last Name: CASCISA
- * REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
- Location: POULSBO, WA
- MTFCA Number: 16897
- MTFCI Number: 16628
Re: Wanted to buy radius rod ball socket for 4 dip pan
Ken,
You are first in line after Mark.
You are first in line after Mark.
Respectfully Submitted,
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
-
Topic author - Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Wanted to buy radius rod ball socket for 4 dip pan
Bob, I will check which one I will need. Ran out and looked, approx 1 -5/8 X 3-5/8 hole spacing is the one I would need. Didn't know there was a difference. The pan was on a 1925, but who know if it was original. If check is ok, send me a pm with total and address. Thank very much.
Mark
PS sorry was later in the day when I saw this. Been outside, it is HOT upstairs were my computer is.
Mark
PS sorry was later in the day when I saw this. Been outside, it is HOT upstairs were my computer is.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 542
- Joined: Sun Jan 06, 2019 12:27 pm
- First Name: BOB
- Last Name: CASCISA
- * REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
- Location: POULSBO, WA
- MTFCA Number: 16897
- MTFCI Number: 16628
Re: Wanted to buy radius rod ball socket for 4 dip pan
Ken,
Number one is taken.
That's the only one I have.
Number one is taken.
That's the only one I have.
Respectfully Submitted,
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
-
Topic author - Posts: 4957
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Wanted to buy radius rod ball socket for 4 dip pan
What to give a shout out to Bob and big thank you!
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup