Commutator rod swivel F/S

Post parts wanted or for sale here

Topic author
Layden Butler
Posts: 1498
Joined: Mon Jan 07, 2019 5:39 pm
First Name: Layden
Last Name: Butler
Location: Danville CA

Commutator rod swivel F/S

Post by Layden Butler » Fri Aug 12, 2022 7:42 pm

I can supply a very limited number of the proper timer control rod swivels with nut for earlier Model Ts. They are NOS New Old Stock and there will be no more when these are gone. If you do not have a threaded rod, I will throw in ( until they run out) a later control rod that you could cut off the end and thread for the swivel. Priced at $45 each, domestic postage $10 per order. Let me know if you prefer bare iron or bright.
Attachments
20220812_131747.jpg
20220812_131957.jpg
1;.jpg
Last edited by Layden Butler on Wed Aug 31, 2022 1:33 pm, edited 1 time in total.


Kevin Pharis
Posts: 1354
Joined: Thu Jan 10, 2019 3:54 pm
First Name: Kevin
Last Name: Pharis
Location: Sacramento CA

Re: Commutator rod swivel F/S

Post by Kevin Pharis » Fri Aug 12, 2022 11:05 pm

I’m assuming these are #10-32 thread...? I have looked in every nook and cranny for this size, and not currently available new! This is also the typical size for most carburetor linkage as well. Thank you for making these available Layden!


Topic author
Layden Butler
Posts: 1498
Joined: Mon Jan 07, 2019 5:39 pm
First Name: Layden
Last Name: Butler
Location: Danville CA

Re: Commutator rod swivel F/S

Post by Layden Butler » Sat Aug 13, 2022 12:09 pm

Kevin,
NO these are the correct 12-32 OR 7/32-32.
Ford Model T catalog shows 7/32-32.
See attached info below.
Note that the 2 sizes are only 2 thousandths " different and do directly interchange.
Attachments
t ford 7 32-32.jpg
t ford 1915 parts book swivel.jpg


Topic author
Layden Butler
Posts: 1498
Joined: Mon Jan 07, 2019 5:39 pm
First Name: Layden
Last Name: Butler
Location: Danville CA

Re: Commutator rod swivel F/S

Post by Layden Butler » Mon Aug 29, 2022 3:37 pm

Don't hold out until they are sold out!


rickd
Posts: 401
Joined: Sun Jan 06, 2019 12:56 pm
First Name: Rick
Last Name: Duquette
* REQUIRED* Type and Year of Model Ts owned: 1913 Touring, 1914 Touring, 1925 Touring, 1927 PU, 1955 T Bird, 69 Shelby GT 350
Location: Grand Forks, North Dakota
MTFCA Number: 21848
MTFCI Number: 22173
Board Member Since: 2015

Re: Commutator rod swivel F/S

Post by rickd » Wed Aug 31, 2022 10:43 am

Email sent.


Modelttommy
Posts: 9
Joined: Mon Jan 21, 2019 8:10 pm
First Name: Tom
Last Name: Helf
* REQUIRED* Type and Year of Model Ts owned: 1911 Ford Model T Touring
Location: Cornelius, North Carolina

Re: Commutator rod swivel F/S

Post by Modelttommy » Mon Sep 12, 2022 1:40 pm

do you still have the swivel for the early model t ford spark control rod. Thanks Tom, 1911 touring


tman12
Posts: 174
Joined: Fri Jan 11, 2019 12:31 pm
First Name: john
Last Name: Willams
* REQUIRED* Type and Year of Model Ts owned: '09 Roadstr, '12 Touring, '26 Fronti Speedster
Location: Cedar Rapids Iowa
MTFCI Number: 20566

Re: Commutator rod swivel F/S

Post by tman12 » Mon Sep 12, 2022 3:17 pm

Hi From Iowa! i would like one of the swivel & rod sets if available? Thanks john

Post Reply Previous topicNext topic